Inhalation From The Valve Balloon - Vapormed VOLCANO MEDIC Instructions For Use Manual

7. THE USE OF HEMP FLOWERS
When the Valve Balloon is filled,
switch off the air pump and remove
the Valve Balloon together with the
Filling Chamber.
To do so, hold the Filling Chamber
Cap at the textured grip.
Remove Valve Balloon with Filling Chamber
Caution! Hot surface!
Do not touch any compo-
nents of the Filling Chamber
(except at the textured grip)
until it has cooled down after
the Valve Balloon has been filled.
Separate the Valve Balloon from the
Filling Chamber. The Valve closes
automatically after separation and the
aerosol in the Valve Balloon cannot
escape.
Separate Valve Balloon from Filling
Chamber
Do not leave the Filling Chamber on
the hot air outlet of the VOLCANO
MEDIC when "HEAT" is switched on
- except for filling the Valve Balloon.
Non-observance may cause the Fill-
ing Chamber to overheat and may
cause burns.
Caution! Hot surface!
32
7. THE USE OF HEMP FLOWERS
7.4. Inhalation from the Valve
Balloon
Attach the Mouthpiece with attached
Lip Piece to the Valve and allow it to
lock in place.
Attach the Mouthpiece with attached Lip
Piece to the Valve Balloon
Correct position of the Mouthpiece with Lip
Piece on the Valve
To inhale, put the Mouthpiece to your
lips and press them lightly against the
Mouthpiece. By doing so, the Valve
opens and the aerosol can be inhaled
from the Valve Balloon.
As soon as you remove the pressure
from the Mouthpiece, the Valve auto-
matically closes.
Press Mouthpiece against lips to inhale
33