Inhalation From The Valve Balloon - Vapormed VOLCANO MEDIC Instructions For Use Manual

6. THE USE OF DRONABINOL
When the Valve Balloon is filled, press
the "AIR" button and shut off the air
pump and remove the Valve Balloon
together with the Filling Chamber.
To do so, hold the Filling Chamber
Cap at the textured grip.
Remove Valve Balloon with Filling Chamber
Caution! Hot surface!
Do not touch any compo-
nents of the Filling Chamber
(except at the textured grip)
until they have cooled down
after the Valve Balloon has been filled.
Separate the Valve Balloon from the
Filling Chamber. The Valve closes
automatically after separation and the
aerosol in the Valve Balloon cannot
escape.
Detach Valve Balloon from Filling Chamber
Do not leave the Filling Chamber on
the hot air outlet of the VOLCANO
MEDIC when "HEAT" is switched on
– except for separating the alcohol or
filling the Valve Balloon.
Non-observance may cause the Fill-
ing Chamber to overheat and may
cause burns.
Caution! Hot surface!
24
6. THE USE OF DRONABINOL
6.4. Inhalation from the
Valve Balloon
Attach the Mouthpiece with attached
Lip Piece to the Valve and allow it to
lock in place.
Attach the Mouthpiece with attached Lip
Piece onto the Valve Balloon
Correct position of the Mouthpiece with Lip
Piece on the Valve
To inhale, put the Mouthpiece to your
lips and lightly press against the
Mouthpiece with your lips. By doing
so, the Valve opens and the aerosol
can be inhaled from the Valve Balloon.
As soon as you remove the pressure
from the Mouthpiece, the Valve auto-
matically closes.
Press Mouthpiece against lips to inhale
As the content of the Valve
Balloon deflates, it may be
completely emptied
stretching the Valve Balloon taut and
subsequently inhaling the content
25
by