Operation - Stanley PBD600 User Manual

CHARGE BATTERY
USING THE PBD600
8 ► PBD600 User Manual

OPERATION

Pressure Release
5
1
2
Battery Charging
Battery Charged
Hot/Cold Delay
Set the Trigger Lock BEFORE
inserting or removing material
from the Crimping Jaw.
3 4
1. Set the trigger lock.
2. Insert battery.
3. Pull out the jaw pin and open the
crimping jaw.
4. Close the crimping jaw and lock the jaw
pin into place.
5. Release the trigger lock. Press and hold
the trigger until the crimp is complete.
Press and hold the pressure release to
open the cutting jaw.
Note: Release the trigger to immediately
stop the tool. Press the pressure release
at any time to open the jaws.