Troubleshooting - Stanley PBD600 User Manual

TROUBLESHOOTING

The tool won't crimp when I press the trigger.
The InteLED flashes yellow when I activate the tool.
The tool repeatedly give me bad crimps / The InteLED
flashes red after every crimp.
The tool is leaking hydraulic oil.
The tool cannot connect to STANLEY Crimp software.
The tool is not saving data.
14 ► PBD600 User Manual
OPERATION
Problem Solution
Ensure the battery is charged. Disengage the trigger
lock.
The maintenance interval is about to elapse. Have the
tool serviced as soon as possible.
Ensure the battery is fully charged. If problem persists,
have the tool serviced as soon as possible.
Have the tool serviced immediately.
Ensure the tool is connected to the computer via the
USB port and that InteLED is blue. Your computer
may be downloading USB drivers. Check the Windows
system tray for download progress.
Have the tool serviced as soon as possible.