Boot - DFI SU171 User Manual

Boot

InsydeH20 Setup Utility
Main Advanced Security Boot
Numlock <On>
Boot Type <Dual Boot Type>
Network Stack <Disabled>
PXE Boot Capability <Disabled>
USB Boot <Enabled>
 EFI
 Legacy
F1 Help ↑/↓ Select Item F5/F6
Esc Exit ←/→  Select Item Enter
Numlock
Select the power-on state for numlock.
Boot Type
Select the boot type. The options are Dual Boot Type, Legacy Boot Type or UEFI Boot
Type.
If you select "Dual Boot" or "UEFI Boot", the "Network Stack", PXE Boot capability"
and "USB Boot" will show up.
If you select "Legacy Boot", "PXE Boot to LAN" and "USB Boot" will show up.
Network Stack
This field is used to enable or disable network stack.
PXE Boot capability
Disabled : Suppoort Network Stack
UEFI PXE : IPv4/IPv6
Legacy : Legacy PXE OPROM only
PXE Boot to LAN
Disable or enable PXE boot to LAN.
Chapter 3 BIOS Setup
Rev. 5.0
Exit
Selects Power-on state for
Numlock
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

Chapter 3
USB Boot
Enable or disable the booting to USB boot devices.
Main Advanced
Numlock
Boot Type
Network Stack
PXE Boot Capability
USB Boot
 EFI
 Legacy
F1 Help ↑/↓ Select Item
Esc Exit ←/→  Select Item
EFI
This section is used to set EFI boot order.
42
InsydeH20 Setup Utility
Security Boot Exit
EFI Boot Order Settings
<On>
<Dual Boot Type>
<Disabled>
<Disabled>
<Enabled>
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

Rev. 5.0
www.dfi .com