DFI SU171 User Manual page 37

ME Configuration
This section configures settings relevant to flash ME region.
InsydeH20 Setup Utility
Advanced
Me Fw Image Re-Flash <Disabled>
F1 Help ↑/↓ Select Item F5/F6
Esc Exit ←/→  Select Item Enter
Me Fw Image Re-Flash
This field is used to enable or disable the flash ME region.
MEBX Configuration
This section configures MEBX setting. Please refer to Chapter 6 for more information.
Chapter 3 BIOS Setup
Chapter 3
Rev. 5.0
Enable/disable to fl ash ME
region
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

Active Management Technology Support
The section allows users to enable or disable the Intel
AMT) BIOS extension. Refer to chapter 6 for more information.
Advanced
Active Management Technology Support
Intel AMT Support <Disabled>
Un-Confi gure ME <Disabled>
F1 Help ↑/↓ Select Item
Esc Exit ←/→  Select Item
37
Active Management Technology (Intel
®
InsydeH20 Setup Utility Rev. 5.0
Enable/Disable Intel(R)
Active Management Tech-
nology BIOS Extension.
Note : iAMT H/W is al-
ways enabled. This Option
Just controls the BIOS
extension execution.
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

www.dfi .com
®