DFI SU171 User Manual page 41

Storage Password Setup Page
InsydeH20 Setup Utility
Main Advanced Security Boot
Current TPM Device <TPM 2.0 (DTPM)>
TPM State Enabled, Owned
TPM Availability <Available>
TPM Operation <No Operation>
Clear TPM [ ]
Supervisor Password Not installed
Set Supervisor Password
Set All Hdd Password
Set All Master Hdd Password
 Storage Password Setup Page
F1 Help ↑/↓ Select Item F5/F6
Esc Exit ←/→  Select Item Enter
Storage Password Setup Page
This option allowes you to set up storage password.
InsydeH20 Setup Utility
Main Advanced Security Boot
Storage Password Setup
 ST3160318AS
↑ and ↓ to change option. ENTER to select an option. ESC to exit.
F1 Help ↑/↓ Select Item F5/F6
Esc Exit ←/→  Select Item Enter
ST3160318AS (Device Name)
This option allowes you to go to Storage Password List Help.
Chapter 3 BIOS Setup
Rev. 5.0
Exit
Storage Password Setup
Page
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

Rev. 5.0
Exit
Storage Password Setup
Page
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

Chapter 3
Main Advanced
Device Name:
Security Mode:
Set Storage Password
Set Master Hdd Password
F1 Help ↑/↓ Select Item
Esc Exit ←/→  Select Item
Security Mode Description
Lock: HDD security status is enable and lock.
Unlock: HDD security status is enable and lock.
Change: HDD security status is unlock and user changes to the new password.
Disable: Remove HDD password from device.
No Access: HDD Secutiry status is not enabled when entering SCU.
Set Storage Password
Set all HDD password and suggest the length of password greater than one character.
How to clear HDD password: only press "Enter" when set new password.
Set Master Hdd Password
Set master HDD password and suggest the length of password greater than
one character.
When secutiry mode is Lock, input master HDD password to unlock HDD.
Master HDD password is valid when HDD password is set.
Only pressing "Enter" would clear HDD password and make HDD secutiry disable
when set new master HDD password.
41
InsydeH20 Setup Utility
Security Boot Exit
[ST3160318AS]
No Accessed
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

Rev. 5.0
www.dfi .com