1. Manuals
  2. Brands
  3. DFI Manuals
  4. Motherboard
  5. SB601-C
  6. User manual

DFI SB601-C User Manual

System board
Hide thumbs
Table of Contents

Advertisement

Quick Links

SB601-C
System Board
User's Manual
A19410217

Advertisement

Table of Contents
loading

Related Manuals for DFI SB601-C

Summary of Contents for DFI SB601-C

  • Page 1 SB601-C System Board User’s Manual A19410217...

  • Page 2: Copyright

    Copyright This publication contains information that is protected by copyright. No part of it may be reproduced in any form or by any means or used to make any transfor- mation/adaptation without the prior written permission from the copyright hold- ers.

  • Page 3: Fcc And Doc Statement On Class B

    FCC and DOC Statement on Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation.

  • Page 4: Table Of Contents

    Introduction Table of Contents ................... 2 Copyright ..................2 Trademarks FCC and DOC Statement on Class B ..........3 ................7 About this Manual ..................7 Warranty Static Electricity Precautions ............. 8 ................. 8 Safety Measures ................9 About the Package Before Using the System Board ............
  • Page 5 Introduction ................45 I/O Connectors CD-in Internal Audio Connector ..........45 S/PDIF Connector ..............46 Digital I/O Connectors .............. 47 SATA (Serial ATA) Connectors ............ 48 Cooling Fan Connectors ............. 49 Chassis Instrusion Connector ............ 50 Power Connectors ..............51 Standby Power LED ..............
  • Page 6 Introduction ....... 116 Appendix A - NLITE and AHCI Installation Guide Appendix B - Watchdog Sample Code ......... 128 Appendix C - System Error Message ..........129 ............131 Appendix D - Troubleshooting...

  • Page 7: About This Manual

    Introduction About this Manual An electronic file of this manual is included in the CD. To view the user’s manual in the CD, insert the CD into a CD-ROM drive. The autorun screen (Main Board Utility CD) will appear. Click “User’s Manual” on the main menu. Warranty 1.

  • Page 8: Static Electricity Precautions

    Introduction Static Electricity Precautions It is quite easy to inadvertently damage your PC, system board, components or devices even before installing them in your system unit. Static electrical dis- charge can damage computer components without causing any signs of physical damage.

  • Page 9: About The Package

    Introduction About the Package The system board package contains the following items. If any of these items are missing or damaged, please contact your dealer or sales representative for as- sistance. One motherboard  Two USB port cables (with bracket) ...

  • Page 10: Chapter 1 - Introduction

    Introduction Chapter 1 - Introduction Specifications Processor • LGA 1155 socket for: - Intel Core™ i7-2600 (8M Cache, up to 3.8 GHz); 95W ® - Intel Core™ i5-2400 (6M Cache, up to 3.4 GHz); 95W ® - Intel Core™ i3-2120 (3M Cache, 3.3 GHz); 65W ®...
  • Page 11 Introduction TPM (optional) • TPM - Trusted Platform Module • Provides a Trusted PC for secure transactions • Provides software license protection, enforcement and pass- word protection Rear Panel I/O • 1 mini-DIN-6 port for PS/2 mouse/keyboard Ports • 2 DB-9 serial ports - Supports RS232/422/485 (RS232 and/or Power) •...
  • Page 12 Introduction Temperature • Operating: 0 C to 60 • Storage: -20 C to 85 • 10% to 90% Humidity • ATX form factor • 305mm (12”) x 244mm (9.6”)

  • Page 13: Features

    Introduction Features Watchdog Timer The Watchdog Timer function allows your application to regularly “clear” the sys- tem at the set time interval. If the system hangs or fails to function, it will reset at the set time interval so that your system will continue to operate. DDR3 DDR3 delivers increased system bandwidth and improved performance.
  • Page 14 Introduction Serial ATA Serial ATA is a storage interface that is compliant with SATA 1.0a specifica- tion. SATA 3.0 supports speed up to 6Gb/s while SATA 2.0 supports speed up to 3Gb/s. This improves hard drive performance faster than the standard parallel ATA whose data transfer rate is 100MB/s.
  • Page 15 Introduction RTC Timer The RTC installed on the system board allows your system to automatically pow- er-on on the set date and time. ACPI STR The system board is designed to meet the ACPI (Advanced Configuration and Power Interface) specification. ACPI has energy saving features that enables PCs to implement Power Management and Plug-and-Play with operating systems that support OS Direct Power Management.

  • Page 16: Chapter 2 - Hardware Installation

    Hardware Installation Chapter 2 - Hardware Installation System Board Layout PS/2 Power select (JP3) CPU fan USB 10-11 DDR3_2 DDR3_4 Chassis PS/2 power select DDR3_1 DDR3_3 intrusion (JP6) KB/MS USB 10 COM 1 RS232/ USB 11 COM1 RS232/422/485 Power select select ( (JP9) Fintek...

  • Page 17: System Memory

    Hardware Installation Important: Electrostatic discharge (ESD) can damage your system board, processor, disk drives, add-in boards, and other components. Perform the upgrade instruction procedures described at an ESD workstation only. If such a station is not available, you can provide some ESD protection by wearing an antistatic wrist strap and attaching it to a metal part of the system chassis.
  • Page 18 Hardware Installation The system board supports the following memory interface. Single Channel (SC) Data will be accessed in chunks of 64 bits (8B) from the memory channels. Dual Channel (DC) Data will be accessed in chunks of 128 bits from the memory channels. Dual channel provides better system performance because it doubles the data transfer rate.

  • Page 19: Installing The Dim Module

    Hardware Installation Installing the DIM Module Note: The system board used in the following illustrations may not resemble the actual board. These illustrations are for reference only. 1. Make sure the PC and all other peripheral devices connected to it has been powered down.
  • Page 20 Hardware Installation 6. Grasping the module by its edges, position the module above the socket with the “notch” in the module aligned with the “key” on the socket. The keying mechanism ensures the module can be plugged into the socket in only one way.

  • Page 21: Cpu

    Hardware Installation The system board is equipped with a surface mount LGA 1155 socket. This sock- et is exclusively designed for installing a LGA 1155 packaged Intel CPU. Important: 1. Before you proceed, make sure (1) the LGA 1155 socket comes with a protective cap, (2) the cap is not damaged and (3) the socket’s contact pins are not bent.

  • Page 22: Installing The Cpu

    Hardware Installation Installing the CPU 1. Make sure the PC and all other peripheral devices connected to it has been powered down. 2. Disconnect all power cords and cables. 3. Locate the LGA 1155 CPU s o c k e t o n t h e s y s t e m COM 2 board.
  • Page 23 Hardware Installation 5. Lifting the load lever will at Load lever the same time lift the load plate. Lift the load lever up to the angle shown on the Load photo. plate 6. Remove the protective cap from the CPU socket. The cap is used to protect the CPU socket against dust and harmful particles.
  • Page 24 Hardware Installation 7. Insert the CPU into the socket. The gold triangu- lar mark on the CPU must align with the corner of the CPU socket shown on the photo. Gold triangular mark The CPU’s notch will at Alignment key the same time fi...
  • Page 25 Hardware Installation 8. Close the load plate then push the load lever down. While closing the load plate, make sure the front Retention edge of the load plate knob slides under the retention knob. 9. Hook the load lever under Load lever the retention tab.

  • Page 26: Installing The Fan And Heat Sink

    Hardware Installation Installing the Fan and Heat Sink The CPU must be kept cool by using a CPU fan with heat sink. Without suffi cient air circulation across the CPU and heat sink, the CPU will overheat damaging both the CPU and system board. Note: A boxed Intel processor already includes the CPU fan and heat sink as-...
  • Page 27 Hardware Installation 4. Rotate each push-pin ac- cording to the direction of the arrow shown on top of the pin. Push down two pushpins that are diagonally across the heat sink. Perform the same procedure for the other two push-pins. Heat sink “Unlocked”...

  • Page 28: Jumper Settings

    Hardware Installation Jumper Settings Clear CMOS Data COM 2 COM 1 2-3 On: Clear CMOS Data 1-2 On: Normal (default) If you encounter the following, a) CMOS data becomes corrupted. b) You forgot the supervisor or user password. you can reconfi gure the system with the default values stored in the ROM BIOS. To load the default values stored in the ROM BIOS, please follow the steps below.

  • Page 29: Ps/2 Power Select

    Hardware Installation PS/2 Power Select 1-2 On: +5V COM 2 COM 1 (default) 2-3 On: +5V_standby and supports PS/2 keyboard/ mouse auto swap function JP3 is used to select the power of the PS/2 keyboard and PS/2 mouse ports. Se- lecting +5V_standby will allow you to use the PS/2 keyboard or PS/2 mouse to wake up the system.

  • Page 30: Usb Power Select

    Hardware Installation USB Power Select USB 10-11 (JP6) 1-2 On: +5V 2-3 On: COM 2 COM 1 (default) +5V_standby USB 0-1/8-9 (JP4) 1-2 On: +5V 2-3 On: (default) +5V_standby USB 2-3/ 4-5 (JP5) 1-2 On: +5V 2-3 On: (default) +5V_standby These jumpers are used to select the power of the USB ports.

  • Page 31: Power-On Select

    Hardware Installation Power-on Select COM 2 COM 1 1-2 On: Power-on via power button (default) 2-3 On: Power-on via AC power; or Power-on via WOL after G3 To power-on via WOL after G3: 1. Set JP8 pins 2 and 3 to On. 2.

  • Page 32: Com1/Com2 Rs232/Rs422/Rs485 Select

    Hardware Installation COM1/COM2 RS232/RS422/RS485 Select COM 2 COM 2 COM 1 COM 1 JP1 (for COM1) and JP2 (for COM2) are used to confi gure the COM ports to RS232, RS422 (Full Duplex) or RS485. The pin function of the COM ports will vary according to the jumper’s setting. JP1/JP2 1-2 On: RS232 3-4 On: RS422...

  • Page 33: Com1/Com2 Rs232/Power Select

    Hardware Installation COM1/COM2 RS232/Power Select JP10 COM 2 COM 1 1-3 (RI), 2-4 (DCD) On: RS232 (default) 3-5 (+5V), 4-6 (+12V) On: RS232 with power...

  • Page 34: Rear Panel I/O Ports

    Hardware Installation Rear Panel I/O Ports PS/2 COM 2 LAN 1 LAN 2 Line-in/ KB/MS Surround Line-out USB 10-11 COM 1 DVI-I USB 0-1 USB 8-9 Mic-in/ (DVI-D signal only) Center+Subwoofer The rear panel I/O ports consist of the following: •...

  • Page 35: Ps/2 Keyboard/ Mouse Port

    Hardware Installation PS/2 Keyboard/ Mouse Port PS/2 Keyboard/ Mouse COM 2 COM 1 The PS/2 port is used to connect a PS/2 keyboard and a PS/2 mouse by means of the provided cable. Wake-On-PS/2 Keyboard/ Mouse The Wake-On-PS/2 Keyboard/ Mouse function allows you to use the PS/2 key- board or PS/2 mouse to power-on the system.
  • Page 36 Hardware Installation Important: By default, the PS/2 port supports PS/2 keyboard only. If you intend to connect a PS/2 mouse, you must set JP3 to 2-3 On. This will support the auto-swap function allowing the system to auto-detect the PS/2 de- vice.

  • Page 37: Com (Serial) Ports

    Hardware Installation COM (Serial) Ports COM 2 COM 2 COM 1 COM 1 COM 1 and COM 2: RS232/422/485 COM 3 COM 3 to COM 6: RS232 COM 4 COM 6 COM 5 COM 3 to COM 6 are fi xed at RS232. The pin function of COM 1 and COM 2 ports will vary according to JP1/JP2’s set- ting.

  • Page 38: Vga Port

    Hardware Installation VGA Port COM 2 COM 1 The VGA port is used for connecting a VGA monitor. Connect the monitor’s 15-pin D-shell cable connector to the VGA port. After you plug the monitor’s cable con- nector into the VGA port, gently tighten the cable screws to hold the connector in place.

  • Page 39: Dvi-I Port

    Hardware Installation DVI-I Port COM 2 COM 1 DVI-I (DVI-D signal only) The DVI-I port is used to connect an LCD monitor. This port supports DVI-D sig- nal only. Connect the display device’s cable connector to the DVI-I port. After you plug the cable connector into the port, gently tighten the cable screws to hold the connec- tor in place.

  • Page 40: Rj45 Lan Ports

    Hardware Installation RJ45 LAN Ports LAN 1 COM 2 COM 1 LAN 2 Features • Realtek RTL8111DL PCI Express Gigabit Ethernet controller The LAN ports allow the system board to connect to a local area network by means of a network hub. BIOS Setting Confi...

  • Page 41: Usb Ports

    Hardware Installation USB Ports USB 11 USB 10 COM 2 COM 1 USB 1 USB 0 USB 9 USB 8 USB 4-5 USB 2-3 USB allows data exchange between your computer and a wide range of simulta- neously accessible external Plug and Play peripherals. The system board is equipped with four onboard USB 2.0/1.1 ports.
  • Page 42 Hardware Installation Wake-On-USB Keyboard/Mouse The Wake-On-USB Keyboard/Mouse function allows you to use a USB keyboard or USB mouse to wake up a system from the S3 (STR - Suspend To RAM) state. To use this function: • Jumper Setting JP4, JP5 and/or JP6 must be set to “2-3 On: +5V_standby”. Refer to “USB Power Select”...

  • Page 43: Audio

    Hardware Installation Audio Rear audio COM 2 Line-in/ Surround COM 1 Line-out Mic-in/ Center+Subwoofer Front audio Rear Audio The system board is equipped with 3 audio jacks. A jack is a one-hole connecting interface for inserting a plug. • Mic-in/ Center+Subwoofer Jack (Pink) This jack is used to connect an external microphone or to the center and subwoofer speakers of the audio system.
  • Page 44 Hardware Installation BIOS Setting Confi gure the onboard audio in the Chipset menu (“South Bridge” submenu) of the BIOS. Refer to chapter 3 for more information. Driver Installation Install the audio driver. Refer to chapter 4 for more information.

  • Page 45: I/O Connectors

    Hardware Installation I/O Connectors CD-in Internal Audio Connector COM 2 COM 1 Right audio channel Ground Ground Left audio channel The CD-in connector is used to receive audio from a CD-ROM drive, TV tuner or MPEG card.

  • Page 46: S/Pdif Connector

    Hardware Installation S/PDIF Connector COM 2 COM 1 SPDIF out Ground SPDIF in The S/PDIF connector is used to connect an external S/PDIF port. Your S/PDIF port may be mounted on a card-edge bracket. Install the card-edge bracket to an available slot at the rear of the system chassis then connect the audio cable to the S/PDIF connector.

  • Page 47: Digital I/O Connectors

    Hardware Installation Digital I/O Connectors COM 2 COM 1 The 8-bit Digital I/O connector provides powering-on function to external devices that are connected to these connectors. Pin Assignment Pin Assignment +12V DIO7 +12V DIO6 DIO5 DIO4 DIO3 DIO2 V_5P0_STBY DIO1 V_5P0_STBY DIO0...

  • Page 48: Sata (Serial Ata) Connectors

    Hardware Installation SATA (Serial ATA) Connectors COM 2 COM 1 SATA 3.0 6Gb/s SATA 0 SATA 1 SATA 3 SATA 2 SATA 5 SATA 4 SATA 2.0 3Gb/s Features • SATA 0 supports data transfer rate up to 6Gb/s • SATA 1 to SATA 5 support data transfer rate up to 3Gb/s •...

  • Page 49: Cooling Fan Connectors

    Hardware Installation Cooling Fan Connectors COM 2 COM 1 Ground Speed Control Power Sense CPU fan Ground Power Sense System fan 1 Sense Ground Power System fan 2 The fan connectors are used to connect cooling fans. The cooling fans will provide adequate airfl...

  • Page 50: Chassis Instrusion Connector

    Hardware Installation Chassis Intrusion Connector Chassis COM 2 COM 1 signal Ground The board supports the chassis intrusion detection function. Connect the chas- sis intrusion sensor cable from the chassis to this connector. When the system’s power is on and a chassis intrusion occurred, an alarm will sound. When the system’s power is off and a chassis intrusion occurred, the alarm will sound only when the system restarts.

  • Page 51: Power Connectors

    Hardware Installation Power Connectors 12 24 Ground +3.3VDC COM 2 +12VDC +5VDC COM 1 +5VDC +12VDC +5VDC +5VSB PWR_OK Ground Ground Ground +5VDC Ground Ground PS_ON# +5VDC Ground Ground +3.3VDC -12VDC +3.3VDC +3.3VDC ATX power Ground 12V power Use a power supply that complies with the ATX12V Power Supply Design Guide Version 1.1.

  • Page 52: Standby Power Led

    Hardware Installation Standby Power LED COM 2 Standby COM 1 Power LED This LED will light red when the system is in the standby mode. It indicates that there is power on the system board. Power-off the PC and then unplug the power cord prior to installing any devices.

  • Page 53: Front Panel Connectors

    Hardware Installation Front Panel Connectors COM 2 COM 1 PWR-LED HDD-LED PWR-BTN RESET-SW HDD-LED - HDD LED This LED will light when the hard drive is being accessed. RESET SW - Reset Switch This switch allows you to reboot without having to power off the system. PWR-BTN - Power Switch This switch is used to power on or off the system.

  • Page 54: Expansion Slots

    Hardware Installation Expansion Slots COM 2 COM 1 PCI 1 PCI 2 PCI 3 PCI 4 PCI 5 Mini PCI Express PCI 6 PCI 7 PCI Slots The PCI slot supports expansion cards that comply with PCI specifi cations. Mini PCI Express Slot Install mini PCI Express cards such as network cards or other cards that comply to the mini PCI Express specifi...

  • Page 55: Ide Connector

    Hardware Installation IDE Connector COM 2 COM 1 The IDE connector is used to connect hard drives. The connector on the IDE cable can be inserted into this connector only if pin 1 of the cable is aligned with pin 1 of this connector. The IDE connector supports 2 devices, a Master and a Slave.
  • Page 56 Hardware Installation Important: If you encountered problems while using an ATAPI CD-ROM drive that is set in Master mode, please set the CD-ROM drive to Slave mode. Some ATAPI CD-ROMs may not be recognized and cannot be used if incorrectly set in Master mode.

  • Page 57: Battery

    Hardware Installation Battery COM 2 COM 1 Battery The lithium ion battery powers the real-time clock and CMOS memory. It is an auxiliary source of power when the main power is shut off. Safety Measures • Danger of explosion if battery incorrectly replaced. •...

  • Page 58: Sdvo Connector

    Hardware Installation SDVO Connector COM 2 COM 1 The SDVO connector is used to connect the optional SDVO-LVDS daughterboard. Pin Assignment Pin Assignment Ground DPB_AUXP DPB_LANE0_P DPB_AUXN DPB_LANE0_N SDVO_STALLP Ground SDVO_STALLN DPB_LANE1_P SDVO_INTP DPB_LANE1_N SDVO_INTN Ground PCIE_RST DPB_LANE2_P DPB_CTRLCLK DPB_LANE2_N DPB_CTRLDATA Ground DPB_HPD...

  • Page 59: Sdvo-Lvds Daughterboard (Optional)

    Hardware Installation SDVO-LVDS Daughterboard (optional) Features • Chrontel CH7308B • Supports 18/24-bit 1600x1200 LVDS panel (default 1024x768) • 1 LVDS LCD panel connector • 1 LCD/Inverter power connector • SDVO interface • Supports dimming control via hot keys Dimensions • 45mm (1.77") x 38mm (1.49")

  • Page 60: Jumper Settings

    Hardware Installation Jumper Settings Panel Power Select 1-2 On: +12V 3-4 On: +5V 5-6 On: +3.3V (default) JP8 is used to select the power supplied to the LCD panel. Important: Before powering-on the system, make sure JP8’s setting matches the LCD panel’s specifi...

  • Page 61: I/O Connectors

    Hardware Installation I/O Connectors LVDS LCD Panel Connector LCD/Inverter Power Connector LCD/Inverter power LVDS LCD panel The system board allows you to connect a LCD Display Panel by means of the LVDS LCD panel connector and the LCD/Inverter power connector. These connec- tors transmit video signals and power from the system board to the LCD Display Panel.
  • Page 62 Hardware Installation LVDS LCD Panel Connector Pins Pins Function Function N. C. N. C. N. C. N. C. LVDS_Out2+ LVDS_Out6+ LVDS_Out2- LVDS_Out6- LVDS_Out1+ LVDS_Out5+ LVDS_Out1- LVDS_Out5- LVDS_Out0+ LVDS_Out4+ LVDS_Out0- LVDS_Out4- LVDS_CLK1+ LVDS_CLK2+ LVDS_CLK1- LVDS_CLK2- LVDS_DDCCLK N. C. LVDS_DDCDAA N. C. Panel Power Panel Power Panel Power...

  • Page 63: Installing The Sdvo-Lvds Daughterboard Onto The Motherboard

    Hardware Installation Installing the SDVO-LVDS Daughterboard onto the Motherboard (optional) Important: The motherboard used in this section is for reference purpose only and may not resemble your motherboard. These illustrations are mainly to guide you on how to install SDVO-LVDS onto the motherboard of your choice.
  • Page 64 Hardware Installation 3. While supporting the mounting screw at the bottom, from the top side of the board, fasten a bolt into the screw. Bolt 4. The SDVO connector is located at the bottom of the daughterboard. Grasp- ing SDVO-LVDS by its edges, position it on top of the motherboard’s SDVO connector with its mounting holes aligned with the bolts on the motherboard.

  • Page 65: Hardware Installation

    Hardware Installation SDVO connector on the motherboard 5. Press SDVO-LVDS down fi rmly until it is completely seated on the SDVO con- nector of the motherboard. SDVO-LVDS Motherboard 6. Use the provided mounting screws to secure SDVO-LVDS to the motherboard. Mounting screw...

  • Page 66: Chapter 3 - Bios Setup

    BIOS Setup Chapter 3 - BIOS Setup Overview The BIOS is a program that takes care of the basic level of communication be- tween the CPU and peripherals. It contains codes for various advanced features found in this system board. The BIOS allows you to confi gure the system and save the confi...
  • Page 67 BIOS Setup Legends Keys Function Right and Left arrows Moves the highlight left or right to select a menu. Up and Down arrows Moves the highlight up or down between submenus or fi elds. <Esc> Exits to the BIOS Setup Utility. + (plus key) Scrolls forward through the values or options of the highlighted fi...

  • Page 68: Ami Bios Setup Utility

    BIOS Setup AMI BIOS Setup Utility Main The Main menu is the fi rst screen that you will see when you enter the BIOS Setup Utility. Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset Boot Security Save &...

  • Page 69: Advanced

    BIOS Setup Advanced The Advanced menu allows you to confi gure your system for basic operation. Some entries are defaults required by the system board, while others, if enabled, will improve the performance of your system or let you set some features ac- cording to your preference.

  • Page 70: Acpi Sleep State

    BIOS Setup ACPI Power Management Confi guration This section is used to confi gure the ACPI Power Management. Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Advanced ACPI Power Management Confi guration Select the highest ACPI sleep state the system will [S3 (Suspend to RAM) ] ACPI Sleep State enter, when the SUSPEND...

  • Page 71: Tpm Support

    BIOS Setup Trusted Computing (optional) This section confi gures settings relevant to Trusted Computing innovations. Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Advanced TPM Confi guration Enables or Disables TPM Support [Disabled] TPM support. O.S. will not show TPM. Reset of platform is required.

  • Page 72: Pc Health Status

    BIOS Setup PC Health Status This section displays the SIO hardware health monitor. Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Advanced  Smart Fan Function  Smart Fan Function Case Open [Disabled] System Hardware Monitor CPU Temperature : +38 C : +24 C System Temperature...
  • Page 73 BIOS Setup Boundary 1 to Boundary 4 The range is from 0-127. Speed Count 1 to Speed Count 5 The range is from 1-100. Case Open Set this fi eld to Enabled to allow the system to alert you of a chassis intru- sion event.

  • Page 74: Limit Cpuid Maximum

    BIOS Setup CPU Confi guration This section is used to confi gure the CPU. It will also display the detected CPU information. Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Advanced CPU Confi guration Enabled for Windows XP and Linux (OS optimized ...

  • Page 75: Sata Mode

    BIOS Setup SATA Confi guration This section is used to confi gure SATA functions. Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Advanced (1) IDE Mode. SATA Confi guration (2) AHCI Mode. SATA Mode [IDE Mode] Serial-ATA Controller 0 [Compatible] Serial-ATA Controller 1 [Enhanced]...
  • Page 76 BIOS Setup If IDE is selected in the SATA Mode fi eld, it will display the following information: Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Advanced SATA Confi guration (1) IDE Mode. (2) AHCI Mode. SATA Mode [IDE Mode] SATA Port 0 Not Present...

  • Page 77: Intel Igd Swsci Opregion

    BIOS Setup Intel IGD SWSCI OpRegion This section is used to confi gure the Intel graphics display. Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Advanced Select DVMT Mode used Intel IGD SWSCI OpRegion Confi guration by Internal Graphics Device DVMT Mode Select [DVMT Mode]...
  • Page 78 BIOS Setup Intel TXT (LT) Confi guration This section is used to confi gure the Intel Trusted Execution technology. Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Advanced Intel Trusted Execution Technology Confi guration Intel TXT support only can be enabled/disabled if SMX is enabled.

  • Page 79: Legacy Usb Support

    BIOS Setup USB Confi guration This section is used to confi gure USB. Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Advanced Enables Legacy USB USB Confi guration support. AUTO option disables legacy support if USB Devices: no USB devices are 2 Hubs connected.

  • Page 80: Watchdog Timer

    BIOS Setup F71879 Super IO Confi guration This section is used to confi gure the I/O functions supported by the onboard Super I/O chip. Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Advanced Restore AC Power Loss F71879 Super IO Confi guration help.

  • Page 81: Serial Port

    BIOS Setup Serial Port 1 Confi guration to Serial Port 2 Confi guration Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Advanced Serial Port 1 Confi guration Enable or Disable Serial Port (COM) [Enabled] Serial Port IO=3F8h; IRQ=4; Device Settings [Auto] Change Settings...
  • Page 82 BIOS Setup Second Super IO Confi guration This section is used to confi gure the serial port functions. Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Advanced Second Super IO Confi guration Set Parameters of Serial Port 3 (COMC) Fintek F81217 Super IO Chip ...
  • Page 83 BIOS Setup Onboard ATA Controller Confi guration This section confi gures settings relevant to the onboard ATA Controller Confi gura- tion. Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Advanced PATA Primary Master Maxtor 6L120P0 (123GB) PATA Primary Slave Not Present ATA Controller [IDE Mode]...

  • Page 84: Chipset

    BIOS Setup Chipset Confi gures relevant chipset functions. Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit North Bridge Parameters  North Bridge  South Bridge  ME Subsystem  Select Screen ...

  • Page 85: North Bridge

    BIOS Setup North Bridge Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Chipset Memory Information VT-d Enable/Disable Total Memory 2048 MB (DDR3 1333) 2048 MB (DDR3 1333) Memory Slot0 0 MB (DDR3 1333) Memory Slot1 Memory Slot2 0 MB (DDR3 1333) Memory Slot3 0 MB (DDR3 1333) VT-d...

  • Page 86: South Bridge

    BIOS Setup South Bridge Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Chipset Enable/Disable GbE SB Chipset Confi guration control PME in S5. After G3 [Power On] Audio Confi guration Azalia HD Audio [Enabled]  PCI Express Ports Confi guration ...

  • Page 87: Mini Pcie

    BIOS Setup PCI Express Ports Confi guration Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Chipset PCI Express Ports Confi guration Enable/Disable the PCI Express Ports in the Onboard ATA Controller [Enabled] Chipset. Mini PCIe [Auto] [Enabled] Onboard LAN1 [Enabled] Onboard LAN2 ...

  • Page 88: All Usb Devices

    BIOS Setup USB Confi guration Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Chipset USB Confi guration Enable/Disable All USB Devices [Enabled] All USB Devices [Enabled] EHCI Controller 1 EHCI Controller 2 [Enabled] [Enabled] USB Port 0 USB Port 1 [Enabled] [Enabled] USB Port 2...
  • Page 89 BIOS Setup ME Subsystem Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Chipset Intel ME Subsystem Confi guration ME Subsystem Help 7.0.4.1197 ME Version ME Subsystem [Enabled] Execute MEBx [Enabled]  Select Screen  Select Item Enter: Select +/ -: Change Opt.

  • Page 90: Boot

    BIOS Setup Boot Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Number of seconds to Boot Confi guration wait for setup activation Setup Prompt Timeout key. Bootup NumLock State [On] 65535(0xFFFF) means indefi...

  • Page 91: Security

    BIOS Setup Security Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Password Description Set Setup Administrator Password If ONLY the Administrator’s password is set, then this only limits access to Setup and is only asked for when entering Setup.

  • Page 92: Save & Exit

    BIOS Setup Save & Exit Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Save Changes and Reset Reset the system after Discard Changes and Reset saving the changes. Save Options Restore Defaults Save as User Defaults Restore User Defaults...

  • Page 93: Updating The Bios

    BIOS Setup Updating the BIOS To update the BIOS, you will need the new BIOS fi le and a fl ash utility, AFUDOS. EXE. Please contact technical support or your sales representative for the fi les. To execute the utility, type: A:>...

  • Page 94: Chapter 4 - Supported Software

    Supported Software Chapter 4 - Supported Software The CD that came with the system board contains drivers, utilities and software applications required to enhance the performance of the system board. Insert the CD into a CD-ROM drive. The autorun screen (Mainboard Utility CD) will appear.

  • Page 95: Intel Chipset Software Installation Utility

    Supported Software Intel Chipset Software Installation Utility The Intel Chipset Software Installation Utility is used for updating Windows ® fi les so that the Intel chipset can be recognized and confi gured properly in the system. To install the utility, click “Intel Chipset Software Installation Utility” on the main menu.
  • Page 96 Supported Software 3. Go through the readme document for system re- quirements and installation tips then click Next. 4. Setup is now installing the driver. Click Next to con- tinue. 5. Click “Yes, I want to restart this computer now” then click Finish.

  • Page 97: Intel Graphics Drivers

    Supported Software Intel Graphics Drivers To install the driver, click “Intel Graphics Drivers” on the main menu. 1. Setup is now ready to in- stall the graphics driver. Click Next. By default, the “Automatically run WinSAT and enable the Windows Aero desktop theme”...
  • Page 98 Supported Software 2. Read the license agreement then click Yes. 3. Go through the readme document for system re- quirements and installation tips then click Next. 4. Setup is currently installing the driver. After installation has completed, click Next.
  • Page 99 Supported Software 5. Click “Yes, I want to restart this computer now” then click Finish. Restarting the system will allow the new software in- stallation to take effect.

  • Page 100: Audio Drivers

    Supported Software Audio Drivers To install the driver, click “Audio Drivers” on the main menu. 1. Setup is now ready to in- stall the audio driver. Click Next. 2. Follow the remainder of the steps on the screen; click- ing “Next” each time you fi...

  • Page 101: Realtek Lan Drivers

    Supported Software Realtek LAN Drivers To install the driver, click “Realtek LAN Drivers” on the main menu. 1. Setup is ready to install the driver. Click Next. 2. Click Install to begin the installation. 3. After completing installa- tion, click Finish.

  • Page 102: Intel Management Engine Interface

    Supported Software Intel Management Engine Interface To install the driver, click “Intel Management Engine Interface” on the main menu. 1. Setup is ready to install the driver. Click Next. 2. Read the license agreement then click Yes. 3. Go through the readme document for more installa- tion tips then click Next.
  • Page 103 Supported Software 4. Setup is currently installing the driver. After installation has completed, click Next. 5. After completing installa- tion, click Finish.

  • Page 104: Myguard Hardware Monitor

    Supported Software MyGuard Hardware Monitor 1. Locate for the MyGuard folder in the provided disc. 2. In the MyGuard folder, right-click on the “setup” fi le. 3. Select Run As Administra- tor. 4. Double-click Setup. Important: Perform steps 1-3 only when using Windows 7 or Windows Vista.
  • Page 105 Supported Software 7. Setup is currently installing the utility. 8. After completing instal- lation, click Finish to exit setup.

  • Page 106: Intel Rapid Storage Technology

    Supported Software Intel Rapid Storage Technology To install the driver, click “Intel Rapid Storage Technology” on the main menu. 1. Setup is ready to install the driver. Click Next. 2. Read the warning carefully then click Yes. 3. Read the license agreement then click Yes.
  • Page 107 Supported Software 4. Go through the readme document to view system requirements and installa- tion information then click Next. 5. Setup is currently installing the driver. After installation has completed, click Next. 6. Click “Yes, I want to restart my computer now” then click Finish.

  • Page 108: F6 Floppy Configuration Utility

    Supported Software F6 Floppy Configuration Utility This is used to create a fl oppy driver diskette needed when you install Windows ® XP using the F6 installation method. This will allow you to install the operating system onto a hard drive when in AHCI mode. 1.

  • Page 109: Adobe Acrobat Reader

    Supported Software Adobe Acrobat Reader 9.3 To install the reader, click “Adobe Acrobat Reader 9.3” on the main menu. 1. Click Next to install or click Change Destination Folder to select another folder. 2. Click Install to begin instal- lation. 3.
  • Page 110 Supported Software Infineon TPM Driver and Tool (optional) To install the driver, click “Infi neon TPM driver and tool (option)” on the main menu. 1. TPM requires installing the Microsoft Visual C++ pack- age prior to installing the driver. Click Install. 2.
  • Page 111 Supported Software 4. Click “I accept the terms in the license agreement” and then click “Next”. 5. Enter the necessary infor- mation and then click Next. 6. Select a setup type and then click Next.
  • Page 112 Supported Software 7. Click Install. 8. The setup program is cur- rently installing the driver. 9. Click Finish.
  • Page 113 Supported Software Click Yes to restart the system. Restarting the system will allow the new software installation to take effect.
  • Page 114 Supported Software Intel Turbo Boost To install the driver, click “Intel Turbo Boost” on the main menu. 1. The setup program is con- fi guring the new software installation. 2. Click Next. 3. Read the license agreement and then click “I accept the terms in the license agree- ment”.
  • Page 115 Supported Software 4. Click Install. 5. The setup program is cur- rently installing the soft- ware. 6. Click Finish.

  • Page 116: Appendix A - Nlite And Ahci Installation Guide

    NLITE and AHCI Installation Guide Appendix A - NLITE and AHCI Installation Guide nLite nLite is an application program that allows you to customize your XP installation disc by integrating the RAID/AHCI drivers into the disc. By using nLite, the F6 function key usually required during installation is no longer needed.
  • Page 117 NLITE and AHCI Installation Guide 4. Insert the XP installation disc into an optical drive. 5. Launch nLite. The Welcome screen will appear. Click Next. 6. Click Next to temporarily save the Windows installa- tion fi les to the designated default folder.
  • Page 118 NLITE and AHCI Installation Guide 7. Click Next. 8. In the Task Selection dia- log box, click Drivers and Bootable ISO. Click Next.
  • Page 119 NLITE and AHCI Installation Guide 9. Click Insert and then se- lect Multiple driver folder to select the drivers you will integrate. Click Next. Select only the drivers appropriate for the Win- dows version that you are using and then click OK. Integrating 64-bit driv- ers into 32-bit Windows or vice versa will cause...
  • Page 120 NLITE and AHCI Installation Guide If you are uncertain of the southbridge chip used on your motherboard, select all RAID/AHCI con- trollers and then click Click Next.
  • Page 121 NLITE and AHCI Installation Guide The program is currently integrating the drivers and applying changes to the installation. When the program is fi n- ished applying the chang- es, click Next.
  • Page 122 NLITE and AHCI Installation Guide To create an image, se- lect the Create Image mode under the General section and then click Next. Or you can choose to burn it directly to a disc by selecting the Direct Burn mode under the General section.
  • Page 123 NLITE and AHCI Installation Guide You have finished cus- tomizing the Windows XP installation disc. Click Finish. Enter the BIOS utility to confi gure the SATA con- troller to RAID/AHCI. You can now install Windows...
  • Page 124 NLITE and AHCI Installation Guide AHCI The installation steps below will guide you in confi guring your SATA drive to AHCI mode. 1. Enter the BIOS utility and confi gure the SATA controller to IDE mode. 2. Install Windows XP but do not press F6. 3.
  • Page 125 NLITE and AHCI Installation Guide 5. In the Hardware Update Wizard dialog box, select “No, not this time” then click Next. 6. Select “Install from a list or specifi c location (Ad- vanced)” and then click Next. 7. Select “Don’t search. I will choose the driver to install”...
  • Page 126 NLITE and AHCI Installation Guide 8. Click “Have Disk”. 9. Select C:\AHCI\iaAHCI.inf and then click Open. Select the appropriate AHCI Controller of your hardware device and then click Next.
  • Page 127 NLITE and AHCI Installation Guide A warning message ap- peared because the se- lected SATA controller did not match your hardware device. Ignore the warning and click Yes to proceed. Click Finish. The system’s settings have been changed. Win- dows XP requires that you restart the computer.

  • Page 128: Appendix B - Watchdog Sample Code

    Watchdog Timer Appendix B - Watchdog Sample Code ;Software programming example: ;--------------------------------------------- ;(1) Enter Super IO Configuration mode ;--------------------------------------------- DX,2EH AL,87H DX,AL DX,AL ;------------------------------------------------------------------------------------------- ;(2) Configuration Logical Device 7, register CRF5/CRF6 (WDT Control /WDT timer) ;------------------------------------------------------------------------------------------- DX,2EH AL,07H ;Ready to Program Logical Device DX,AL DX,2FH AL,07H...

  • Page 129: Appendix C - System Error Message

    System Error Message Appendix C - System Error Message When the BIOS encounters an error that requires the user to correct something, either a beep code will sound or a message will be displayed in a box in the mid- dle of the screen and the message, PRESS F1 TO CONTINUE, CTRL-ALT-ESC or DEL TO ENTER SETUP, will be shown in the information box at the bottom.
  • Page 130 System Error Message Hard Disk(s) fail (20) HDD initialization error. Hard Disk(s) fail (10) Unable to recalibrate fi xed disk. Hard Disk(s) fail (08) Sector Verify failed. Keyboard is locked out - Unlock the key The BIOS detects that the keyboard is locked. Keyboard controller is pulled low. Keyboard error or no keyboard present Cannot initialize the keyboard.

  • Page 131: Appendix D - Troubleshooting

    Troubleshooting Appendix D - Troubleshooting Troubleshooting Checklist This chapter of the manual is designed to help you with problems that you may encounter with your personal computer. To effi ciently troubleshoot your system, treat each problem individually. This is to ensure an accurate diagnosis of the problem in case a problem has multiple causes.

  • Page 132: Power Supply

    Troubleshooting The picture seems to be constantly moving. 1. The monitor has lost its vertical sync. Adjust the monitor’s vertical sync. 2. Move away any objects, such as another monitor or fan, that may be creating a magnetic fi eld around the display. 3.

  • Page 133: Hard Drive

    Troubleshooting Hard Drive Hard disk failure. 1. Make sure the correct drive type for the hard disk drive has been entered in the BIOS. 2. If the system is confi gured with two hard drives, make sure the bootable (fi rst) hard drive is confi gured as Master and the second hard drive is confi g- ured as Slave.

  • Page 134: System Board

    Troubleshooting System Board 1. Make sure the add-in card is seated securely in the expansion slot. If the add-in card is loose, power off the system, re-install the card and power up the system. 2. Check the jumper settings to ensure that the jumpers are properly set. 3.

Table of Contents