DFI SU171 User Manual page 39

InsydeH20 Setup Utility
Advanced
Fan Speed Count 1 [30]
Fan Speed Count 2 [40]
Fan Speed Count 3 [50]
Fan Speed Count 4 [75]
COM Port 1 <Enable>
Base I/O Address <3F8>
Interrupt <IRQ4>
Type <RS232>
COM Port 2 <Enable>
Base I/O Address <2F8>
Interrupt <IRQ3>
Type <RS232>
COM Port 3 <Enable>
Base I/O Address <3E8>
Interrupt <IRQ4>
COM Port 4 <Enable>
Base I/O Address <2E8>
Interrupt <IRQ3>
WDT <Disable>
Case Open <Disable>
AC Power Loss <Always off>
 PC Health Status
F1 Help ↑/↓ Select Item F5/F6
Esc Exit ←/→ Select Item Enter

COM Port 1 to COM Port 4
Configure the settings to use the serial port.
Disable No configuration
Enable User confi guration
Type
Choose RS232/RS485/RS422 (Peer-to-Peer) for the serial port type for COM port 1 and
COM port 2.
Chapter 3 BIOS Setup
Chapter 3
Rev. 5.0
↑
Confi gure Serial port using
options: [Disable] No Con-
figuration [Enable] User
Confi guration
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

Advanced
Fan Speed Count 1
Fan Speed Count 2
Fan Speed Count 3
Fan Speed Count 4
COM Port 1
Base I/O Address
Interrupt
Type
COM Port 2
Base I/O Address
Interrupt
Type
COM Port 3
Base I/O Address
Interrupt
COM Port 4
Base I/O Address
Interrupt
WDT
WDT
Counter
Case Open
AC Power Loss
 PC Health Status
F1 Help ↑/↓ Select Item
Esc Exit ←/→ Select Item

WDT
Enable or disable the watchdog function. A counter will appear if you select to enable
WDT. Input any value between 1 to 255.
Case Open
Enable or disable the case open detection function.
AC Power Loss
Set the AC power loss always off/on.
39
InsydeH20 Setup Utility Rev. 5.0
↑
[30]
[40]
[50]
[75]
<Enable>
<3F8>
<IRQ4>
<RS232>
<Enable>
<2F8>
<IRQ3>
<RS232>
<Enable>
<3E8>
<IRQ4>
<Enable>
<2E8>
<IRQ3>
<Enabled>
<SECOND>
[38]
<Disable>
<Always off>
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

www.dfi .com