DFI SU171 User Manual page 33

Video Configuration
This section configures the video settings.
InsydeH20 Setup Utility
Advanced
Video Confi guration
Primary Display <Auto>
Internal Graphics <Auto>
Always Enabled PEG <Disabled>
Boot display <DP+HDMI>
Backlight Control <Normal>
Panel Color Depth <18 Bit>
LVDS Mode <PWM Mode>
LCD Panel Type <1024x768>
Primary Display
Auto
IGFX
PEG
PCI
F1 Help ↑/↓ Select Item F5/F6
Esc Exit ←/→  Select Item Enter
Primary Display
Set the initial priority.
InsydeH20 Setup Utility
Advanced
Video Confi guration
Primary Display <Auto>
Internal Graphics <Auto>
Always Enabled PEG <Disabled>
Boot display <DP+HDMI>
Backlight Control <Normal>
Panel Color Depth <18 Bit>
LVDS Mode <PWM Mode>
LCD Panel Type <1024x768>
F1 Help ↑/↓ Select Item F5/F6
Esc Exit ←/→  Select Item Enter
Internal Graphics
Keep IGFX enabled or disabled based on the setup options.
Always Enabled PEG
Enable or disable the PEG function.
Chapter 3 BIOS Setup
Chapter 3
Rev. 5.0
Select which of IGFX/
PEG/PCI Graphics device
should be Primary Display
or Select SG fro Switch-
able Gfx.
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

Rev. 5.0
Keep IGFX enabled based
on the setup options.
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

Advanced
Video Confi guration
Primary Display
Internal Graphics
Always Enabled PEG
Boot display
Backlight Control
Panel Color Depth
LVDS Mode
LCD Panel Type
F1 Help ↑/↓ Select Item
Esc Exit ←/→ Select Item

Boot display
Set the display device combination.
Backlight Control
Select the Normal/Inverted.
Panel Color Depth
Select the LFP panel color depth: 18 bit, 24 bit, 36 bit or 48 bit.
LVDS Mode
Select the PWM/DC Mode
Note:
In order to control "Primary Display" & "Boot Display", you need to go to Boot tab
and select different "Boot Type" (Boot Section, Page 42)
Boot Type : Legacy Boot Type -> Hide Primary Display & Show Boot Display
Boot Type : UEFI Boot Type -> Show Primary Display & Hide Boot Display
Boot Type : Dual Boot Type -> Show Primary Display & Show Boot Display
33
InsydeH20 Setup Utility Rev. 5.0
Chose display device com-
bination
<Auto>
<Auto>
<Disabled>
<DP+HDMI>
<Normal>
<18 Bit>
<PWM Mode>
<1024x768>
Boot display
LCD+DP
LCD+HDMI
HDMI+LCD
HDMI+DP
DP+LCD
DP+HDMI
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

www.dfi .com