DFI SU171 User Manual page 38

SIO NUVOTON6106D
This section configures the system super I/O chip parameters.
InsydeH20 Setup Utility
Advanced
SYS Smart Fan Control <Enable>
Boundary 1 [30]
Boundary 2 [40]
Boundary 3 [50]
Boundary 4 [60]
Fan Speed Count 1 [30]
Fan Speed Count 2 [40]
Fan Speed Count 3 [50]
Fan Speed Count 4 [75]
CPU Smart Fan Control <Enable>
Boundary 1 [30]
Boundary 2 [40]
Boundary 3 [50]
Boundary 4 [60]
Fan Speed Count 1 [30]
Fan Speed Count 2 [40]
Fan Speed Count 3 [50]
Fan Speed Count 4 [75]
SYS Smart Fan 2 Control <Enable>
Boundary 1 [30]
Boundary 2 [40]
Boundary 3 [50]
Boundary 4 [60]
F1 Help ↑/↓ Select Item F5/F6
Esc Exit ←/→ Select Item Enter

SYS/CPU Smart Fan/Fan 2 Control
Enable or disable the system/CPU smart fan/fan 2.
Boundary 1 to Boundary 4
Set the boundary temperature. The range is from 0-127
Fan Speed Count 1 to Fan Speed Count 4
Set the fan speed. The range is from 1-100%.
Chapter 3 BIOS Setup
Chapter 3
Rev. 5.0
Enable/Disable Smart Fan
↓
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

o C.
Advanced
SYS Smart Fan Control
Fix Fan Speed Count
CPU Smart Fan Control
Fix Fan Speed Count
SYS Smart Fan 2 Control
Fix Fan Speed Count
COM Port 1
Base I/O Address
Interrupt
Type
COM Port 2
Base I/O Address
Interrupt
Type
COM Port 3
Base I/O Address
Interrupt
COM Port 4
Base I/O Address
Interrupt
WDT
Case Open
AC Power Loss

PC Health Status
F1 Help ↑/↓ Select Item
Esc Exit ←/→ Select Item

Note:
SYS Smart Fan, Fan2 and CPU Smart Fan Control can be switched to <Disable>.
When they are disabled, it will enable "Fix Fan Speed Count".
38
InsydeH20 Setup Utility Rev. 5.0
Enable/Disable Smart Fan
<Disable>
[50]
<Disable>
[50]
<Disable>
[50]
<Enable>
<3F8>
<IRQ4>
<RS232>
<Enable>
<2F8>
<IRQ3>
<RS232>
<Enable>
<3E8>
<IRQ4>
<Enable>
<2E8>
<IRQ3>
<Disable>
<Disable>
<Always off>
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

www.dfi .com