EMC CX3-10 Field Installation Manual page 26

Installing a 3U disk enclosure (DAE3P) in a cabinet
Figure 16
Bezel
latch
bracket
Figure 17
EMC Rails and Enclosures (CX3-10 Class and CX3-20 Class Storage Systems) Field Installation Guide
26
Screw (2)
Screw (2)
Front
Securing the enclosure to the channels
4. Make certain disk drives or filler panels are installed in every disk
enclosure slot.
5. Press the front bezel onto the latch brackets at the front of the
cabinet until it snaps into place, then lock the bezel with the key.
See Figure 17.
Bezel
latch
bracket
Attaching the enclosure front bezel
6. If you are installing another DAE3P in the cabinet, repeat the
procedure starting on
enclosures above the DAE3P-OS.
Rear
EMC3491
page 20, stacking additional disk
EMC3457