EMC CX3-10 Field Installation Manual page 14

Installing a 1U SPS tray and SPS units in a cabinet
SPS mounting kit
Table 4
EMC Rails and Enclosures (CX3-10 Class and CX3-20 Class Storage Systems) Field Installation Guide
14
The SPS mounting kit includes the components listed in
.
SPS mounting materials
Component
EMC3298
SPS B filler unit
SPS tray - see Figure 10 on page 17
M4 x 8-mm panhead screw, lock washer,
and flat washer assemblies
M4 x 10-mm flathead screws
2 latch brackets
10 Phillips M5 x 16-mm panhead screws
(black)
2 adjustable
(20.5-34 inches) rails
Front fastener bracket
Table
Use
Attach front to back on either side
between NEMA channels in a 40U
cabinet
For configurations with a single SPS
unit, covers opening in back of tray
For one or two SPSs
Secure SPS units to tray
8 for back of tray
6 for front of tray and fastener bracket
Secure 1U bezel in 40U cabinets
Attach the rail mounting hardware in a
40U cabinet
4.