Offline Measurement; Select Measurement Unit - AND PLUS CONNECT UC-350BLE Instruction Manual

Offline Measurement

Even when you don't have your phone, the weight data is stored in your ID memory
and transmitted next time the scale is connected with your phone (max 30 memory).
Be sure to select your "P#" on the scale. Guest User should select "P8".
1. Step onto the scale platform and remain still while the scale computes your
weight. Keep full contact with the scale until the unit (lb/kg) stop flashing.
2. A beep sound will indicate to step off and the scale will display your weight value
3. The scale will automatically turn off after a few seconds.

Select Measurement Unit

Changing Measurement Unit
The default measurement unit is "lb".
You may press "UNIT" button on the
back of the scale to choose among
kilogram and pound.
• Please put the scale on flat hard ground when finishing the unit selection.
Wait for a few seconds, then you may start measuring. If there is not any
operation in weighing mode, the scale will turn off in a few seconds.
Beep
CAUTION
Beep
E-9