Advertisement
Connection to a PC
Fig. 10 shows the connection diagram of the PC.
The REC/PLAY disc tray can be set as the master according to the jumper setting. After setting, connect the
REC/PLAY disc tray to the secondary IDE cable.
Do not connect other equipment to the secondary cable.
IDE cable, 40-pin
Primary
Secondary
ISA bus
PC
Figs. 11 and 12 show the actual connections between the REC/PLAY disc tray and the PC.
The connections to the PC consist of connecting the IDE cable (40-pin) and the power supply cable (4-pin)
as shown in Fig. 12.
[Fig. 11]
Master
Hard Disk Drive
Master
REC/PLAY
Disc Tray
[Fig. 10]
Slave
Other
Equipment
[Fig. 12]
XR-D400SL
1-15
Advertisement
