JVC XR-D400SL Service Manual page 8

XR-D400SL
Removing the front board (Fig. 13)
1. Remove the top cover.
2. Remove the front panel.
3. Remove the 13 screws J retaining the board.
Removing the disc (Fig. 14)
1. Remove the top cover.
2. Remove the front panel.
3. When removing a disc from the CD-ROM drive (upper
drive), insert a thin wire or similar object into the tray
eject hole at the right end of the drive. When the drive
comes out, pull it out toward the front.
4. When removing a disc from the CD-R/RW drive (lower
drive), insert a thin wire or similar object into the tray
eject hole at the left end of the drive. When the drive
comes out, pull it out toward the front.
1-8
J
Tray eject hole
Tray eject hole
Fig. 13
CD-ROM drive
CD-R/RW drive
Fig. 14
J