Disassembly; Removing And Replacing The Rear Housing Cover - Motorola C330 Service Manual

Disassembly

Disassembly
G
G

Removing and Replacing the Rear Housing Cover

20
This section describes how to disassemble a PF 0C35 telephone. Tools and equip-
ment used are listed in Table 1, preceding.
Many of the integrated devices used in this equipment are vulnerable to damage
from electrostatic discharge (ESD). Ensure adequate static protection is in place
when handling, shipping, and servicing the internal components of this equipment.
Avoid stressing the plastic in any way to avoid damage to either the plastic or
internal components.
1. Ensure the phone is turned off.
2. Press down on the rear housing cover latch on the top end of the phone, gently
lift the rear housing cover away from the latch and slide the rear housing cover
in the direction of the arrow, and lift the cover away from the phone
(see Figure 4).
August 20, 2002
Product Family 0C35
6881040B65