Telnet Control - CYP CPLUS-32FX Operation Manual

6.7 Telnet Control

Before attempting to use Telnet control, please ensure that both the
unit and the PC/Laptop are connected to the same active networks.
To access Telnet
In Windows 7
In Windows XP
In Mac OS X
Once in the CLI (Command Line Interface) type "telnet" followed by
the IP address of the unit and "23", then hit "Enter".
This will connect us to the unit we wish to control. Type "help" to list the
available commands.
Notes:
• Commands will not be executed unless followed by a carriage
return. Commands are not case-sensitive.
• If the IP address is changed then the IP address required for Telnet
access will also change accordingly.
9
Click Start, type "cmd" in the search field,
and press Enter.
Click Start > Run, type "cmd", and press
Enter.
Click Go > Applications > Utilities > Terminal.