Appendix 2 Screen Division - Furuno RD-50 Operator's Manual

APPENDIX 2 SCREEN DIVISION

The screen can be divided as shown below in the [Display] menu.
Screen division
1
*
1
* : Can not select for the [DISP1] screen.
2
* : Where [Depth Position] is set to [Auto].
AP-2
Display form
Graphic Time, Speed, HDG/COG, HDG, ROT, Wind, Rudder, En-
gine, Shaft, Propeller Pitch
Digital Time, POSN, HDG/Speed 3 axis, Speed 3 axis, Speed 2
axis, Speed 1 axis, HDG, COG, WPT, Trip DIST, Total
DIST, Depth, ROT, Wind Speed, Wind Direction, Rudder
Angle, Rudder Angle Order, Water TEMP, Engine, Shaft,
Propeller Pitch, Depth F/A HOR-Split*
Depth F/A VER-Split*
Graph
Depth Graph, Water TEMP Graph, Depth F/A Graph*
Depth A/F Graph*
Time, POSN, Speed 1 axis, HDG, COG, WPT, Trip DIST,
Total DIST, Depth, ROT, Wind Speed, Wind Direction,
Rudder Angle, Rudder Angle Order, Water TEMP, Engine,
Shaft, Propeller Pitch
Digital
Time, POSN, Speed 1 axis, HDG, COG, WPT, Trip DIST,
Total DIST, Depth, ROT, Wind Speed, Wind Direction,
Digital
Rudder Angle, Rudder Angle Order, Water TEMP, Engine,
Shaft, Propeller Pitch
Graph Depth Graph, Water TEMP Graph
-
Display item
2
,
2
, Depth A/F VER-Split*
2
-
2
2
,