Table of Contents
Advertisement
2.8
Engine/Shaft Graphic
You can set the scale range for the engine/shaft graphic.
Example of Engine screen (in case of 300 RPM for display range)
1. Press the MENU/ESC key to open the menu.
2. Press
3. Press
4. Press
graphic screen, and press the ENT key.
5. Press
6. Press the DISP key to close the menu.
or
key to select [Scale Set Up] and press the ENT key.
or
key to select [Engine/Shaft] and press the ENT key.
Display options
or
key to select [DISP1 (2, 3, 4 or 5)], which shows the engine or shaft
Engine/Shaft options
or
key to select the range and press the ENT key.
2. MENU
2-17
Advertisement
Table of Contents
