Table of Contents
Advertisement
1. Remove the hanger mounting plate from the hanger assembly.
2. Fasten the hanger mounting plate to the remote display from the left side and right
side with four binding head screws (M5x12).
Hanger mounting
plate (left side)
3. Make a four pilot holes for self-tapping screws (5x20) in the mounting location.
4. Fix the hanger to the mounting location with four self-tapping screws (5x20).
5. Insert a washer to each knob (right and left) and fix the washer to the remote dis-
play loosely.
6. Set the remote display to the hanger.
7. Tighten the knobs to fasten the hanger to the remote display.
8. Set a cosmetic cap to each fixing hole on the front panel. (See the following "How
to set the cosmetic cap".)
Fixing hole (4-ø7)
190 ± 0.5 (7.48")
288 ± 5 (11.34")
240 (9.45")
4. INSTALLATION
Screw (M5x12)
51 ± 5 (2.01")
149 (5.87")
91 (3.58")
4-3
Advertisement
Table of Contents
