Conditions Of Use; Safety Instructions - AEG BS9314001M User Manual

4 www.aeg.com
Always use oven gloves to remove or put in
•
accessories or ovenware.
Before carrying out any maintenance, disconnect the
•
appliance from the power supply.
Ensure that the appliance is disconnected from the
•
mains.
Do not use a steam cleaner to clean the appliance.
•
Do not use harsh abrasive cleaners or sharp metal
•
scrapers to clean the glass door since they can scratch
the surface, which may result in shattering of the glass.
If the mains power supply cable is damaged, it must
•
be replaced by the manufacturer, its Authorised
Service Centre or similarly qualified persons to avoid
an electrical hazard.
To remove the shelf supports first pull the front of the
•
shelf support and then the rear end away from the
side walls. Install the shelf supports in the opposite
sequence.
The means for disconnection must be incorporated in
•
the fixed wiring in accordance with the wiring rules.
Use only the food sensor (core temperature sensor)
•
recommended for this appliance.

2. CONDITIONS OF USE

This appliance is intended to be used in
household and similar applications such
as:
• Farm houses

3. SAFETY INSTRUCTIONS

3.1 Installation
WARNING!
Only a qualified person must
install this appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Follow the installation instructions
supplied with the appliance.
• By clients in serviced apartments,
holiday apartments and other
residential type environments.
• Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
• Do not pull the appliance by the
handle.
• Keep the minimum distance from
other appliances and units.
• Make sure that the appliance is
installed below and adjacent safe
structures.