Vacon 100 x Installation And Maintenance Manual page 94

vacon • 91
Changing control places
Change of control place from
1. Anywhere in the menu structure, push the FUNCT button.
2. Using the arrow buttons, select Local/Remote and confirm with the OK button.
3. On the next display, select Local or Remote and again confirm with the OK button.
4. The display will return to the same location as it was when the
However, if the Remote control place was changed to Local (Keypad) you will be prompted for
keypad reference.
Figure 70. Changing control places.
Accessing the control page
Control page
The
1. Anywhere in the menu structure, push the
Arrow up
2. Push the
button.
3. The control page appears
If keypad control place and keypad reference are selected to be used you can set the
Reference
after having pressed the
used the display will show Frequency reference which is not editable.
Figure 71. Accessing Control page.
8
Remote Local
to
FUNCT
is meant for easy operation and monitoring of the most essential values.
Arrow down
or the
OK
FUNCT
(keypad).
OK
FUNCT
button.
Control page
button to select
button. If other control places or reference values are
OK
Options
FUNCT
button was pushed.
OK
9169.emf
OK
and confirm with the
Keypad
OK
9170.emf