Launch Creader 971 User Manual page 19

LAUNCH
8. Remove the Memory card from the device and insert it to the included card reader, then insert the card
reader to the computer's USB port.
9. Restart the upgrade tool. Select the item to be updated or click "All", then click [Download] to download.
10. After above steps, remove the Memory card from the card reader and insert it back to the device.
Press the power button to start the device. It prompts an upgrade dialog box (see Picture 5)(Note: This dialog
box will not appear if only latest diagnostic software is available but no firmware package to be downloaded).
Click [OK] to confirm the upgrade.
11. Registration and upgrade steps are complete. The device can be used now.
Method 2: Via USB cable
Note: When use this method to upgrade, please ensure the network is normal.
1. Connect one end of the USB cable to the device, the other end to the computer's USB port.
2.
If a new version has been found, the screen will display as shown in the Picture 6.
3.
Click [OK] button to set the device as USB device, see Picture 7.
(picture 3&4)
18
Creader 971 User's Manual