Optical Drive - HP ENVY 17m Maintenance And Service Manual

Optical drive

Description
ODD DVD-Writer 9.0mm Tray
Bracket, ODD left
Bracket, ODD right
Bezel, ODD
IMPORTANT:
replacement
Before removing the optical drive, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the following components:
a. Base enclosure (see
b. Battery (see
c. Hard drive (see
d. Solid-state drive (see
e. Memory (see
f. WLAN module (see
Remove the optical drive:
Remove 3 screws (1), disconnect the optical drive cable(2), and then slide the optical drive out (3) to
▲
remove it.
Make special note of each screw and screw lock size and location during removal and
Base enclosure on page
Battery on page
Hard drive on page
Solid-state drive on page
Memory on page
WLAN module on page
26).
28).
31).
33).
35).
37).
Spare part number
920417-005
925464-001
931742-001
925455-001
Component replacement procedures 39