Touchpad - HP ENVY 17m Maintenance And Service Manual

TouchPad

Description
TouchPad
TouchPad bracket
IMPORTANT:
replacement
Before removing the TouchPad, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the following components:
a. Base enclosure (see
b. Battery (see
c. Hard drive (see
d. Solid-state drive (see
e. Memory (see
f. WLAN module (see
g. Optical drive (see
Remove the TouchPad:
1. Remove 4 screws (1), and then lift the bracket (2) to remove it.
Make special note of each screw and screw lock size and location during removal and
Base enclosure on page
Battery on page
Hard drive on page
Solid-state drive on page
Memory on page
WLAN module on page
Optical drive on page
26).
28).
31).
33).
35).
37).
39).
Spare part number
935941-001
925466-001
Component replacement procedures 45