System Board - HP ENVY 17m Maintenance And Service Manual

System board

Description
System board
Discrete graphics 940MX 2 GB i5-7200U
Discrete graphics 940MX 2 GB i5-7200U and the Windows operating system
Discrete graphics 940MX 2 GB i7-7500U
Discrete graphics 940MX 2 GB i7-7500U and the Windows operating system
Discrete graphics 940MX 4 GB i7-7500U
Discrete graphics 940MX 4 GB i7-7500U and the Windows operating system
Discrete graphics MX150 2 GB i5-8250U
Discrete graphics MX150 2 GB i5-8250U and the Windows operating system
Discrete graphics MX150 2 GB i7-8550U
Discrete graphics MX150 2 GB i7-8550U and the Windows operating system
Discrete graphics MX150 4 GB i7-8550U
Discrete graphics MX150 4 GB i7-8550U and the Windows operating system
IMPORTANT:
replacement
Before removing the system board, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the following components:
a. Base enclosure (see
b. Battery (see
c. Hard drive (see
d. Solid-state drive (see
e. Memory (see
f. WLAN module (see
g. Optical drive (see
Disconnect the following cables from the system board:
1. Panel cable (1)
2. Touch board (2)
3. Webcam cable and USB board cable(3)
50 Chapter 5 Removal and replacement procedures for authorized service provider parts
Make special note of each screw and screw lock size and location during removal and
Base enclosure on page
Battery on page
Hard drive on page
Solid-state drive on page
Memory on page
WLAN module on page
Optical drive on page
26).
28).
31).
33).
35).
37).
39).
Spare part number
925395-001
925395-601
925396-001
925396-601
925397-001
925397-601
940818-001
940818-601
940819-001
940819-601
940820-001
940820-601