Hard Drive - HP ENVY 17m Maintenance And Service Manual

Hard drive

Description
Hard drive, 1TB 7200 RPM SATA RAW 9.5mm
Cable, hard drive
Rubber, sleeve holder
IMPORTANT:
replacement
Before removing the hard drive, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the following components:
a. Base enclosure (see
b. Battery (see
Remove the hard drive:
1. Disconnect the hard drive cable from the system board(1).
2. Lift the hard drive cable (2), and then lift the hard drive (3) to remove it.
Make special note of each screw and screw lock size and location during removal and
Base enclosure on page
Battery on page
26).
28).
Spare part number
766644-005
925456-001
925465-001
Component replacement procedures 31