Electrical Connections; Power Supply - High Voltage Output (Relay) - Eliwell Memory 1000 Manual

8.6.2 Serial data
Device name
• The first time data is exported, give the Memory 1000 connected a name.
• Click on transfer: data will be downloaded to the PC (this will take a few
minutes).
8.6.3 Tables / Graphs
Table
• Table or Graph display format.
• Define a Profile in the Filters section, select a report and a view data date.
• Select the resource(s) to be displayed.
• You can zoom on the graph to view the x-y values and configure the scale.
• You can now save the profile, export and print the data.
8.6.4 List of plants
• When more than one plant is managed, you can select the plant that you want
to download and save data for.
9MA10011
Data successfully exported
Graphic

9. ELECTRICAL CONNECTIONS

9.1 General warnings
IMPORTANT!
Switch off the device before working on the electrical connections.
All electric work must be performed by a qualified electrician.
To ensure proper connections, the following warnings must be observed:
• Power supply.
• Use cables of the right size for the terminals used.
• Separate the cables of probes and digital inputs from inductive loads and
high voltage connections to prevent any electromagnetic interference. Do not
place probe cables near any electric devices (switches, meters, etc.).
• Make connections are short as possible and do not wind them around
electrically connected parts.
• Do not touch electronic components on boards to prevent the build up of
static electricity.

9.1.1 Power supply - High voltage output (relay).

Do not exceed the maximum permitted current; for higher loads, use a contactor
with sufficient power capacity.
Important!
Make sure that power supply is the correct voltage for the device.
36/52