Network 1; Print Config.; Network Mode; Self-Configuration - Eliwell Memory 1000 Manual

4.4.5 Print config.

4.4.5 ONBOARD CONFIGURATION
Do you want to print ?
^=Yes v=No
From this menu you can print the configuration of onboard inputs (see Printer
section).

4.5 Network 1

N.B.: This menu is for use by authorized personnel only. in fact, the network of
compatible Televis devices connected via RS485 to Memory 1000 can be modified
from this menu.
4.5
4.5.0
4.5.1
4.5.2
4.5.3
4.5.4
4.5.5
4.5.6
Menu available in models with RS485 only.
This menu allows you to configure 'Network 1' or the network of compatible Eliwell
Televis devices connected via serial port RS485 to Memory 1000.
9MA10011
NETWORK 1
Network Mode

Self-configuration

-----------------------
-----------------------
General Info *
units
Print config. *

4.5.0 Network Mode

4.5.0
Change data
Delete
Network type:
Network address
Max. units
Values modifiable only if REC= Off
• Network type: can be Disabled or Televis
• Network address: set network address (MASTER Televis)
4.5.1 Self-configuration
4.5.1
Change data
Delete
Network type:
Last
First
Automatic procedure to recognize compatible Eliwell Televis devices connected via
the RS485 serial port to Memory 1000. The procedure may take a few minutes to
self-configure depending on the number of devices in the network.
• Last address: set the value for the first address assigned to devices in the network.
NETWORK 1 MODE
Network configuration
Televis
14:14
15
SELF-CONFIGURATION
Network configuration
Address
Address
Televis
0:1
0:1
19/52