Units - Eliwell Memory 1000 Manual

• First address: set the value for the last address assigned to devices in the
network.
NOTES:
• Network configuration is automatic.
• When adding or removing instruments from the network, repeat the self-
configuration procedure.
• A number of messages confirming successful or failed network recognition/
configuration, and any error messages will be displayed. Follow the instructions
on the display.
• On completion of configuration, menu 4.5.1 will no longer be accessible.
4.5.2 Not used
4.5.3 Not used
4.5.4 General Info
Read-only menu to view the number of devices found in the network and the
Analogue Inputs read by the network. Example (4 devices and 6 Inputs (3 the first
– see Device Analogue Inputs section, 2 the second, 1 the third):
4.5.4
Total no. of units
Inputs enabled
9MA10011
NETWORK 1 GENERAL
4
6

4.5.5 Units

Menu showing the List of Devices, and giving the names of Compatible Televis
Devices configured for Network 1.
4.5.4
00.01
00.02
00.03
00.04
Each element in the List of Devices includes the Name of the Device (example Nx)
and the Televis address in format Televis (F:D).
Select the required Device (example 00.01) using the Up and Down keys and
press OK.
A menu will open listing the following:
4.5.4
Unit Index
Address
Unit managed
Name
Alarm 1 output
Probe info
NETWORK 1 UNITS
N1-F.0-D.1
N2-F.0-D.2
N3-F.0-D.3
N4-F.0-D.4
NETWORK 1 UNITS
01/04
20/52
0:1
SI
1
>>>