Settings - General Menu; Suspend; Rec On/Off - Eliwell Memory 1000 Manual

EN12830
<=24h / 30s
<=24h
<=7dd
Storage
> 7 dd
OUTSIDE EN12380
Furthermore, if the device has onboard inputs, the following will be displayed:
• The actual number of Analogue Inputs.
• The actual number of Digital Inputs.
It is also strongly recommended to set the access passwords.
Levels of visibility
Three password levels can be set exclusively from the 5.8 PASSWORDS menu.
5.8
PSW REC
Standard PSW
Advanced PSW
• The REC PSW (range 0...255) allows you to protect the start or suspension of
data logging.
• The standard PSW (range 0...255) allows you to restrict access to the 'Std.
Configuration' menu.
• The advanced PSW (range 0...65535) allows you to restrict access to the 'Adv.
Configuration' menu.
9MA10011
PASSWORDS
0
0
99
N.B.: Default values = 0 for all three passwords.
In the example, the Advanced PSW is set to 99. Obviously the 3 passwords can
all be different.
If you prefer, you can restrict access to menu 5 Adv. Configuration with a
password. Then only an Advanced PSW holder will be allowed access to be able
to modify all three passwords.

2.4 Settings - General Menu

Access to system information is organised into menus.
Access to each individual menu is explained below (or in the sections
indicated).
2.4.1 0 – Suspend
0 PRINT
The 0 – Suspend menu allows you to suspend a current print job.
Press the OK key to suspend a print job.
The Print LED will switch off if it was on.
2.4.2 1 – Rec On/Off
1
1.0
1.1
Suspended

REC ON/OFF

REC on
Rec off
10/52