Lcd & Buzzer - Eliwell Memory 1000 Manual

5.1.0
Switch on (mins)
Acknowledge (mins)
REC On (min)
• 5.1.1 BUZZER and ALARM LED functions (shown in UPPER CASE)
- Enable Buzzer (Yes/No)
- Buzzer off/on during acknowledgment
- Buzzer off/on if data logging is NOT active
- ALARM LED on or blinking in the event of active alarms
5.1.1
BUZZER
Disabled
Switches off when acknowledged
Off if 'REC' is Of
LED IN ALARM
On
• 5.1.2 Alarm output (Out1)
- Enable output (Enabled / Not enabled)
- Output off/off during acknowledgment
- Output off/on if data logging is NOT active
- NA or NC contact
9MA10011
EXCLUSION TIMES
BUZZER & LEDS
1
1
1
5.2 Printer
Menu visible in models with integrated printer only.
See Printer section.
5.3 LCD & Buzzer
5.3
Illuminated LCD
Light level
Polarized level
Buzzer
From this menu you can set:
• LCD always illuminated (Yes/ No)
• Light level (range 0...7) Default 3
• Contrast level (range 0...7) Default 3
• Buzzer active (Yes/ No)
5.1.2 DIGITAL OUTPUT 1
Enabled
Switches off when acknowledged
Off if 'REC' is Of
Normally Open
LCD & BUZZER
Si
3
2
No
23/52