Dimensions Of Sensor; Fixed Brackets; Connecting The Signal Line - RayTek TX Operating Instructions Manual

Installation

4.2 Dimensions of Sensor

All sensors are supplied with a fixed bracket and mounting nut. Alternatively, the sensor may also be
mounted using customer-supplied accessories. A pipe adapter and other accessories may also be used
(see section 6.1 Overview on page 29).
All sensors and accessories are supplied with 1.5" 20 UN 2 threads!
Protective Window
Figure 4: Dimensions of the Sensor

4.2.1 Fixed Brackets

Figure 5: Fixed bracket XXXTXXACFB (left) with sensor delivered

4.3 Connecting the Signal Line

Before connecting the cable to the sensor (standard and Smart models) you should unscrew the cap
from the back of the sensor. Proceed as follows:
16 TX
info@Raytek-Direct.com 1.888.610.7664
Rev. O7 07/2017