Jumper; All Jumpers Are Set To A Standard Position In Production; Digital Communication - Eurotherm 637+/D6R KD6R Product Manual

7 Setting and programming
7.1

Jumper

All jumpers are set to a standard position in production !

JP100,
bridged pad...
2 and 3
(standard)
1 and 3
JP101,
bridged pad...
2 and 3
(standard)
1 and 3
JP102,
bridged pad...
2 and 3
(standard)
1 and 3
JP1, JP2
bridged pad...
2 and 3
(standard)
1 and 3
JP3, JP4
bridged pad...
2 and 3
(standard)
1 and 3
JP2.8, JP2.3
JP2.7, JP2.2
open
close
7.2

Digital communication

see chapter 1.1.1
58
READY contact with reference to
common output supply voltage on
X10.21
READY contact can be wired freely
Analog input X10.19 without internal
Pull-up.
Analog input X10.19 with internal
Pull-up to +12 V
(FRR compatible)
X10.23 = active ok. output
X10.23 = GND internal
(FRR compatible)
adjust identically !
X10.15 = high-active
X10.15 = low-active
adjust identically !
X10.14 = high-active
X10.14 = low-active
Default, RP CAN,RP DEV, RP
PDP
RP 232, RP 422, RP 485,
RP IBS,RP EA5, RP SUC
Product-manual Model: 637+/D6R KD6R 07-02-09-01-E-V0402.doc