Fujitsu fi-760PRB Operator's Manual page 10

6
Remove the protection tape on the print cartridge.
ATTENTION
Do not touch the metal part of the print cartridge nor put the
tape back again.
7
With the tab on the print cartridge facing right, put
the print cartridge into the holder.
ATTENTION
Be careful not to let the print cartridge catch the
print circuit film to avoid damaging the film.
8
Bring down the arm of the print cartridge holder
down gently until it locks in and set the print
cartridge in place.
Make sure that the catches (both sides) on the arm
latch onto the print cartridge firmly.
Print Circuit
Film
Catches
9
Move the print cartridge to an appropriate printing
position.
The print cartridge should be positioned within the
section where the document will pass through.
10
Close the print cartridge cover.
9