Preparing for use
Connect the monitor, mouse and keyboard
The ports for the monitor, mouse, and keyboard are on the front and/or rear of the device.
Keyboard port, purple
Monitor port, blue
PS/2 mouse port, green
Connecting the monitor
►
Follow the instructions contained in the monitor manual to prepare the monitor for operation
(e.g. connecting cables).
►
Plug the data cable into the monitor port
Depending on the configuration level of your device and your monitor, you can also
i
connect the data cable to the DVI interface.
►
Plug the monitor power cable into the grounded mains outlet.
Connecting the mouse
Depending on the equipment level selected, your device will be supplied with a PS/2 mouse or a
USB mouse.
Connecting a PS/2 mouse
►
Connect the PS/2 mouse to the PS/2 mouse port
Connecting USB mouse
►
Connect the USB mouse to the USB port
If you do not attach a mouse at the PS/2 mouse port, you can disable the mouse controller
i
in the BIOS Setup in order to free the IRQ12 for a different application.
10
USB port, black
DVI interface (optional)
of the device.
of the device.
of the device.
A26361-K1009-Z120-1-7619, edition 4