Table of Contents
Advertisement
System expansions
1
►
Close the casing (see "Closing the casing").
You can now install a module.
i
It may be necessary to modify the entry for the drive in the BIOS Setup.
Locking or opening module eject lever
You can lock the eject lever on the module slot to prevent unauthorised removal of the drive module
from the module slot. This lock is located behind the eject lever.
►
Open the casing (see "Opening the casing").
Locking eject lever for modules
►
Fold the lock into the notch on the eject
lever.
►
Close the casing (see "Closing the casing").
46
1
2
2
a
b
►
Plug the power supply connector (a) and
the data connector (b) into the module bay
drive contact connector.
►
Insert the drive contact connector of the
module bay into the drive cage and fix it
with the two screws (1).
►
Insert the drive rail of the module bay into
the drive cage and fix it with the two
screws (2).
Opening eject lever for modules
►
Fold the lock upward out of the notch on
the eject lever.
A26361-K1009-Z120-1-7619, edition 4
Advertisement
Table of Contents
