Table of Contents
Advertisement
Closing the casing
2
a
a
►
Push the locking slide (a) in the direction of the arrow until it engages to lock the housing.
►
Lock the casing again if necessary.
►
Return the system unit to its original position.
►
Reconnect the cables that you disconnected before.
A26361-K1009-Z120-1-7619, edition 4
1
►
Position the top cover from above in
the direction of the arrow (1) on the
casing base so that the distance (a)
from the rear casing edge is
approximately 20 mm.
►
Push the top cover in the direction of
the arrow (2) until it engages.
a
System expansions
33
Advertisement
Table of Contents
