Troubleshooting Guide - AnyTone D868UV Instruction Manual

Hide thumbs Also See for D868UV:
Table of Contents

Advertisement

TROUBLE SHOOTING GUIDE
Problems
The radio cannot be switched on or no
display afterswitched on.
The battery doesn't last for long after
charging.
Cannot talk to or hear other members in
your group.
Other voices from
non-group members are heard on the
channel.
38
Professional
FM Transceiver
Solutions
A. Battery pack may not be installed properly.
Remove the battery pack and install it again.
B. Battery power may be insufficient. Recharge or
replace the battery pack.
The battery life is finished; please replace it with a new
battery pack.
1. Make sure the frequency and CTCSS same with
other members.
2. Make sure you are in the efficiency range, cannot
too far away from your member.
3. Make sure you are set in correct digital mode, and
frequency.
4. In digital mode, make sure set correct code and
encrypt group in current channel.
5. In digital mode, make sure set correct receiving
contacts and receiving group.
Analog: Change the CTCSS/DCS
tone, and make sure change the tone on all radios in
your group.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents