Network Configuration - ABB Navigator 600 Series User Manual

Navigator 600 Series Analyzers
AW641 and AW642

3.2 Network Configuration

Note. A Navigator 600 Series analyzer is not configured using Profibus commands but via the analyzer's keypad and menu
system.
To configure Profibus communications, refer to Section 11.6 of the User Guide relevant to the analyzer model and access the
Profibus tab:
Fields
Slave Address
IM/NAV6PBS Issue 1
Description
A unique identifying number for the analyzer from 1 to 126.
A default address of 6 is set in the factory before shipping. This address can be changed to any value
from 1 to 125 to enable the analyzer to be visible on a Profibus system.
3 Network Connection and Configuration
5