Network Configuration - ABB Aztec 600 User Manual

Aztec 600
Colorimetric and ion-selective analyzers

3.2 Network Configuration

Note. An Aztec 600 analyzer is not configured using PROFIBUS commands but via the analyzer's keypad and menu system.
To configure PROFIBUS communications, refer to Section 5.7 of the User Guide relevant to the analyzer model and access the
PROFIBUS tab:
Fields
Slave Address
IM/AZT6PBS–EN Rev. D
Description
A unique identifying number for the analyzer from 1 to 126.
A default address of 6 is set in the factory before shipping. This address can be changed to any value
from 1 to 125 to enable the analyzer to be visible on a PROFIBUS system.
3 Network Connection and Configuration
5