Target Groups; Designated Use - Parker Parkrimp 2 – 83CE-083U Instruction Manual

Hose Crimper Machine Parkrimp
Introduction, Designated Usenated Use
Introduction, Designated Usenated Use
1.2

Target groups

1.3

Designated use

1-2
2
®
This instruction manual is intended for the following target groups:
 the user
 the operator
 This plant is intended for industrial use, suitable only for crimping
Parker hydraulic hose lines of
 size 4 (DN 6) to size 32 (DN 50).
 Use exclusively Parker fittings.
 Use exclusively colour-coded Parkrimp die sets with 8 segments.
 The hydraulic hose lines, the fittings and the die sets must be
tuned to each other.
Machining takes place in single strokes. The workpieces are load-

ed and unloaded manually.
 The maximum hydraulic pressure is 280 bar.
 Do not make any changes to the design of the plant.
 The operating temperature is between 10
 The plant must be operated in closed premises.
 Operation in hazardous locations is prohibited.
Any other use is considered contrary to its designated use.
The consequences of any misuse lie exclusively with the user.
Please note:
Operating the plant within the limits of its designated use involves also
observing the prescribed
 instructions for switching-on
 instructions for switching-off
 operating instructions
 maintenance and servicing measures and
 disposal procedures
Only staff who have read and understood the – always accessible – in-
struction manual, and who have signed it in the appendix and who have
been fully instructed are authorized to operate the machine.
Any person entrusted with the maintenance of or work on the plant must
have read and understood the corresponding parts of this instruction
1-2
o o
C and 40 C.
Bulletin 4480-T12/UK