Parker MiniKrimp 94C-001-PFD Technical Manual

Crimping machine

Hide thumbs

Table Of Contents

MiniKrimp

™

Crimping Machine Technical Manual

Table of Contents

Need help?

Do you have a question about the MiniKrimp 94C-001-PFD and is the answer not in the manual?

Questions and answers

Summary of Contents for Parker MiniKrimp 94C-001-PFD

Page 1 MiniKrimp ™ Crimping Machine Technical Manual...
Page 2 SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. Before selecting or using any Parker hose or fittings or related accessories, it is important that you read and follow Parker Safety Guide for Selecting and Using Hose, Fittings, and Related Accessories (Parker Publication No.
Page 3: Table Of Contents
INSPECTION— Visually inspect all components for shipping damage. If any shipping damage is found, notify the carrier at once. The carrier is responsible for all repair and replacement costs resulting from such damage. Shipping damage is not covered by the Parker warranty.
Page 4: Minikrimp™ Hand Pump - Overview
Reference Crimpsource™ online or appropriate catalog (4660 or Standard Equipment 4400) of the Parker division that Model 94C-001-PFD includes: supplies the hose for detailed Part Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Part Number...
Page 5: Minikrimp™ Air Over Hydraulic - Overview
Full Cycle Time . . . . . . . . . . . . . . . . . . . . . . . . . . approximately 30 seconds Reference Crimpsource™ online or appropriate catalog (4660 or 4400) Standard Equipment of the Parker division that supplies Model 94C-002-PFD includes: the hose for detailed crimp Part Description...
Page 6: Accessories
Accessories MiniKrimp™ Crimping Machine Part # 025349 Part # 015307 Replacement Connector Upright Vise Mount • Replacement stainless-steel bent • Material - High Strength Steel tube rigid connector • Mount connects to the bottom of • For use with 94C-002-PFD the MiniKrimp using (4) 3/8-16 (MiniKrimp Air Over Hydraulic 18-8 SS SHCS 2.5"...
Page 7 Part # 045234 Side Vise Mount High Pressure Hose Assembly • Material: High strength steel • Parker 10,000 psi, 1/4" ID hose assembly with 3000 series quick • Mount connects to the side of the disconnects (PN - HP0101060404- MiniKrimp using four 1/4"-20 36"...
Page 8 Note: The hydraulic connectors shown on these pages are designed exclusively for use with the MiniKrimp. No other connectors are approved for use with the MiniKrimp without expressed written consent from Parker Parflex Division’s technical support. Any worn connectors should be replaced immediately.
Page 9: Assembling The Minikrimp™ Air Over Hydraulic Pump Upgrade Kit
Assembling the MiniKrimp™ Air Over Hydraulic Pump Upgrade Kit, Part #025411 1. (IF APPLICABLE) Relieve pressure 3. Apply appropriate thread sealant to 5. Attach the 025349 bent tube from attached pump. Remove the hand taper pipe thread of 6-2 CTX-S adapter assembly to the two adapters.
Page 10: Minikrimp™ Assembly Detail And Parts List (Hand Pump)
Assembly Detail & Parts List MiniKrimp™ Hand Pump Model Part No. Description Qty. 015301 2 Speed Light Weight Hand Pump 015302 Hardened Steel Sleeve 015303 Custom Cylinder PART # 015301 015304 Aluminum Frame MOUNTS WITH PART # 015304 4-015412 015305 Cup Pusher 2-015413 015306...
Page 11: Minikrimp™ Assembly Detail And Parts List (Air Over Hydraulic)
MiniKrimp™ Air Over Hydraulic Model PART # 025349 PART # 6-6 CTX-S PART # 6-2 CTX-S Part No. Description Qty. 015302 Hardened Steel Sleeve 015303 Custom Cylinder PART # 015304 015304 Aluminum Frame 015305 Cup Pusher 015310 3/8” x 3/8” Shoulder Bolt 015415 Spring Plunger PART # 025399...
Page 12: Crimping Instructions
Fittings – Verify fitting series Lubrication (as required) – Using Parker VBS or VBL (vise corresponds to the selected Using an SAE 20 weight lubri- blocks) and a rubber mallet, tap hose.
Page 13 Hannifin for the express purpose plate. of operating the crimper. Replace pusher onto shoulder bolt. For detailed ordering information, please consult price list or contact Parflex Division. ® Parker Hannifin Corporation | Parflex Division | Ravenna, Ohio | parker.com/pfd ®...
Page 14 Verify crimp diameter is within tolerances. (Reference Crimp Die Selection on Crimpsource online at www.parker.com/crimpsource) For detailed ordering information, please consult price list or contact Parflex Division. ® Parker Hannifin Corporation | Parflex Division | Ravenna, Ohio | parker.com/pfd ®...
Page 15: Trouble Shooting Guide
What to Do Incorrect fitting crimp Wrong fitting style being used . diameter Refer to Parker hose manufacturer’s catalog and/or CrimpSource Online . Wrong die ring being used . www .parker .com/crimpsource Pusher is not bottomed out Lubricate die cavity with Factran EP-2 lithium grease, Dow Corning GN on die ring and base plate assembly paste, or equivalent to prevent dies from sticking in bowl .
Page 16: Frequently Asked Questions
Warranty Policy and Safety Guide refer to the MiniKrimpTM Technical Manual (Bul. 4660-MKD). Where do I purchase Enerpac Replacement Oil for my MiniKrimp™ machine? The Parker Parflex Division does not offer Enerpac Replacement Oil as one of our products. Refer to the chart below for ordering options:...
Page 17: Enerpac Warranty Policy
ENERPAC Warranty Policy For those ENERPAC items sold as part of the Parker Parflex Division product offering, the following warranty applies. ENERPAC products are warranted to be free of defects in materials and workmanship under THE FOREGOING WARRANT IS EXCLUSIVE...
Page 19 Parker Safety Guide Parker Safety Guide for Selecting and Using Hose, Tubing, Fittings, Connectors, Conductors, Valves and Related Accessories ! Parker Safety Guide for Selecting and Using Hose, Tubing, Fittings and Related Accessories Publication No. 4400-B.1 Revised: October 2015, Rev A WARNING: Failure or improper selection or improper use of hose, tubing, •...
Page 20 Hose wall. See section 2.6, Permeation, for more information. effects (particularly, but not limited to refrigeration and air conditioning Parker CNG Hose is intended for dispenser and vehicle use within the systems), incorporation of sufficient drying capacity in the system or specified temperature range.
Page 21 3.5 Field Attachable/Permanent: Do not reuse any field attachable Hose flexing, pressure surges, vibration, and contact with other mechani- Fitting that has blown or pulled off a Hose. Do not reuse a Parker per- cal components. Care must be taken to insure such restraints do not manent Hose Fitting (crimped or swaged) or any part thereof.
Page 22: Offer Of Sale
Never attempt to patch or repair a Hose As- with hot surfaces, open flame or sparks, a fire or explosion may occur. sembly that has failed. Consult the nearest Parker distributor or the ap- See section 2.4.
Page 24 CERTIFIED ISO 9001 Accredited by the Dutch Council for Certification for certification and registration activities. © 2007-2018 Parker Hannifin Corporation - All Rights Reserved Bul. 4660-MKD 2018 TMR Parker Hannifin Corporation Parflex Division 1300 North Freedom Street Ravenna, Ohio 44266 Phone: 330.296.2871...

This manual is also suitable for:

Minikrimp 94c-002-pfd

Parker MiniKrimp 94C-001-PFD Technical Manual

Table of Contents

Need help?

Questions and answers

Related Manuals for Parker MiniKrimp 94C-001-PFD

Summary of Contents for Parker MiniKrimp 94C-001-PFD

This manual is also suitable for:

Table of Contents