Function - Parker Parkrimp 2 – 83CE-083U Instruction Manual

Hose Crimper Machine Parkrimp
Construction and Function
Construction and Function
3.2

Function

Figure 3-2 Safety distance 120 mm minimum
Figure 3-3 Adapter cone and die set
Figure 3-4 Eyelet ring and rear crimp ring half
3-2
2
®
– they can easily cut off parts of your body –
always be aware of this risk during work.
Always check the movements of your hands
with your eyes when loading and unloading the
workpieces – to ensure that you only perform
controlled movements.
serve the safety distance of 120 mm minimum
to the crimping tool.
rect crimping include:
 Fitting and tool have been tuned to each
other.
 The correct spacer ring, the correct adapter
cone and the correct die set have been
mounted.
 Mark the hose insertion depth on the hose.
 Push the hose into the fitting up to the
marked insertion depth.
 Put a preassembled workpiece into the tool
from the bottom (safety distance of your
hands 120 mm minimum).
 Unlock the rear crimp ring half using the
eyelet ring.
 Mount the front crimp ring half.
 Position the workpiece in the tool (safety
distance 120 mm minimum).
 Start the crimping cycle (pusher down) on
the control panel and lower the pusher to
the stop.
3-2
Crimpers are dangerous machines
To protect your hands always ob-
The minimum requirements for cor-
Bulletin 4480-T12/UK