Hose Crimper Machine Parkrimp
Construction and Function
Construction and Function
3.2.1 Assembly instructions
Figure 3-7 Rear die ring half
Figure 3-8 Adapter element
Figure 3-9 Die set
3-4
2
®
Move cylinder and pusher fully up.
Push rear die ring half up and lock it using a pin.
Insert adapter element into die holder. Tilt it slight-
ly and position correctly.
Insert die set into lubricated tool holder ensuring
that the individual segments are distributed even-
ly. The die sets are colour-coded according to
hose size.
3-4
Bulletin 4480-T12/UK