Switching-On; Switching-Off; Restoring Of Power - Parker Parkrimp 2 – 83CE-083U Instruction Manual

Hose Crimper Machine Parkrimp
Operation
Operation
5.2

Switching-on

Figure 5-5 Main switch On
5.3

Switching-off

Figure 5-6 Main switch Off
5.4

Restoring of power

5-2
2
®
The following requirements must be fulfilled before the plant can be
switched on:
 The plant has been properly installed and first commis-
sioning has been performed by expert personnel (setter and skilled
electrician). The direction of rotation of the motor has been
checked.
 The plant has been equipped with the suitable Parkrimp die set.
Die set, fitting and hose have been properly selected.
 All tools and auxiliary equipment have been removed from the
plant.
 Only the operator is allowed to stay in the working area of the
plant.
 All emergency stop situations must have been rectified.
 The operator has read and understood the instruction manual. He
has received the instruction manual from the user and follows the
instructions set out therein.
 The operator is familiar with the safety regulations.
 Switch on the main switch.
The plant is now on.
 Finish the crimping cycle completely.
 Deposit the workpiece outside the plant.
 Switch off the main switch.
The plant is now off.
Restoring of power is the same operating sequence as switching-on
(chapter 5.1).
5-2 Bulletin 4480-T12/UK