Table of Contents
Advertisement
Configuration options: [Power off] [Follow AC/Power] [Last State].
In mode [Power On] the front button is disabled. This means that there is
no way to force down the system pressing the front button for more than four
seconds, avoiding accidental shutdown.
USB+PS/2 Wakeup from S3/S4 [Enabled]
You may select to power some devices during Standby- or Hibernate-Mode,
to enable them to wake up the system.
Configuration Options: [Enabled] [Disabled]
Wake-on Modes
Please note that you have to shut down the system in power saving modes
by OS before you can use Wake-on modes. Switching off the system by
mainpower switch or frontbutton-override will not initialize system wakeup
functions. See following table, which wakeup events are available from dif-
ferent power states:
Front Button
LAN
Modem
Time
PS/2
USB
(Note2)
Note 1: "Yes" is valid only, if the option <Wake on Ring> is [Enabled].
Note 2: "Yes" is valid only, if option <USB Device Wakeup from S3/S4> is
[Enabled].
Wake On Ring [Disabled]
This allows enabling or disabling power up the BEETLE when the modem
receives a call while the BEETLE is in Soft-Off or Hibernate mode.
NOTE: The BEETLE cannot receive or transmit data until the system and
applications are fully running, thus connection cannot be made on the first
try. Turning an external modem off and then back on while the BEETLE is
off causes an initialization string that will cause the system to power on.
Configuration options: [Disabled] [Enabled].
44
Standby (S3)
Yes
Yes
Yes
(Note1)
Yes
Yes
Yes
Hibernate (S4)
Yes
Yes
Yes
Yes
Yes
Yes
D425-CPU-Desktop
Soft off (S5)
Yes
Yes
Yes
Yes
No
No
Advertisement
Table of Contents
