Table of Contents
Advertisement
[Compatible] With this option the second line below changed the text to:
<Legacy IDE Channels> With this option the user has the choice to toggle
between three IDE modes. SATA Only, SATA Primary, PATA Secondary or
PATA only
Primary IDE Master/Slave & Secondary IDE Master/Slave
Primary IDE Slave
Device
Vendor
Size
LBA Mode :Supported
Block Mode :16Sectors
PIO Mode
Async DMA :MultiWord DMA-2
Ultra DMA
S.M.A.R.T. :Supported
Type:
LBA/Large Mode
Block (Multi-Sector Transfer)
PIO Mode
DMA Mode
S.M.A.R.T.
32Bit Data Transfer
Note: Before attempting to configure a hard disk drive, make sure you
have the configuration information supplied by the manufacturer of the drive.
Incorrect settings my cause your system not to recognize the installed hard
disk. To allow the BIOS to detect the drive type automatically, select [Auto].
Type [Auto]
Select [Auto] to automatically detect an attached SATA drive. If automatic
detection is successful, the correct values will be filled in for the remaining
fields on this sub-menu. If automatic detection fails, your hard disk drive may
be too old or too new. You can try to update your BIOS or to enter the SATA
drive parameters manually.
For special cases you can select a drive type here.
The options are [Not Installed] [Auto] [CD/DVD] [ARMD]
LBA/Large Mode [Auto]
LBA (Logical Block Addressing) is a method of addressing data on a disk
drive. The options are [Auto] [Disabled]
40
:Hard Disk
:TOSHIBA MK1637GSX
:160.0GB
:4
:Ultra DMA-5
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
D425-CPU-Desktop
Advertisement
Table of Contents
