Page 2
Please send us a copy of this page if you have any constructive criticism. We would like to thank you in advance for your comments. With kind regards, Your opinion Wincor Nixdorf International GmbH Documentation R&D SAT22 Wohlrabedamm 31 D-13629 Berlin E-Mail: retail.documentation@wincor-nixdorf.com...
Page 3
POS Motherboard J1-CPU User Manual Edition November 2012...
Page 6
COM2*-6* Connectors ................18 DVI-I Connector ..................19 DisplayPort Connector ................20 Audio Connector ..................21 Connectors and Headers for internal Connection ........21 SATA ....................... 21 USB Header .................... 22 Front Panel Interface Connector ............. 23 Cash Drawer Interface Connector ............23 Fan Connector (with FAN speed control) ..........
Page 7
Intel GMCH Configuration ..............46 Advanced Menu ..................47 Sub Menu CPU Configuration ............. 47 Advanced Menu ..................48 Sub Menu SATA Configuration ............48 Advanced Menu ..................49 Sub Menu USB Configuration ............. 49 Advanced Menu ..................50 Sub Menu ...
6 COM ports (5 ports have the option to be powered COM interfaces) Onboard RJ11 remote control interface RMT (power save button) 8 USB ports PS/2 connector, supports keyboard and mouse via Y-cable Cash Drawer support on board POS Motherboard with J1-CPU...
Page 10
Optional NVRAM and TPM module support via mini PCIe OS support includes Windows 7 (32 Bit), Windows 8 (32 Bit), XP (32 Bit), Linux Long term availability (5 years; Intel embedded roadmap) POS Motherboard with J1-CPU...
PC Ie x1 Intel 82583V SATA-II 1,2 SATA2 mini PCIe Slot PC Ie x1 USB Port 1~8 USB2.0 Cash Drawer CPLD 5M40ZE64 Clock 5 COM* RMT connector RJ11 LPC SIO 1 COM PS/2 KEYBOARD Flash ROM POS Motherboard with J1-CPU...
COM port not connected, Ethernet link and memory configuration as mentioned below, Windows 7, 32Bit idle. Voltage Condition 3.3V 0.3A 0.15A 0.75W S0 No Ethernet link 0.12A 0.6W 5VSB (S0) S0 100MBit 0.18A 0.9W S0 1GB 0.35A 1.75W POS Motherboard with J1-CPU...
J1 Motherboard supports power states S0, S3, S4 and S5. Wake up events from sleep states are supported from USB ports, COM1 ring indicator, inter- nal CMOS clock, PS/2 Keyboard or Mouse and Ethernet. Power management supports ACPI 3.0 and APM1.2 POS Motherboard with J1-CPU...
(for both x8 and x16) DRAM Chip Data Width: x8, x16 Banks / DRAM Chip: 8 Support DIMM page size of 4KB and 8KB The motherboard supports the following memory features: 800 /1066 MHz unbuffered SDRAM SO-DIMM POS Motherboard with J1-CPU...
Regarding driver related features please see latest information on Intel’s homepage. The analogue VGA port utilizes an integrated 350MHz RAMDAC capable of driving a standard progressive scan monitor resolution up to 1920 x 1200 at 60Hz. POS Motherboard with J1-CPU...
Gigabit LAN interface is provided thru a cost effective PCI-e based GigaBit Ethernet Controller made by Intel 82583V. Super I/O Controller Super I/O controller IT8783 from ITE provides the following functions: 6 16C550 UARTs PS/2 controller Automatic Fan Speed controller Tachometer inputs Hardware monitor POS Motherboard with J1-CPU...
An onboard stereo audio power amplifier which is capable of delivering typi- cally 2W per channel of continuous average power to an 8 ohm load with 10% THD is provided if the audio output is to drive an external or internal speaker. POS Motherboard with J1-CPU...
COM cable must be used. All serial ports comply with RS-232 signalling level voltage. PS/2 Keyboard Interface The keyboard controller is part of the Super I/O chip. The PS/2 keyboard in- terface is available on a Mini DIN connector. POS Motherboard with J1-CPU...
In this case both outputs stay inactive. Intrusion Detect Interface The J1 Motherboard supports an intrusion detect interface. This is a 3pin shrouded header. TPM is supported via an optional TPM module (IC SLB9635-TT1.2) for mini PCIe slot. POS Motherboard with J1-CPU...
RMT Feature The motherboard J1 supports onboard RMT connector. This interface is used to remote power on this motherboard from a connected Wincor Nixdorf Monitor BA82/BA83. Furthermore the PC speaker signal is routed to the monitor using this interface.
Type: Mini-DIN Female Pin Number Function KB Data KB Clock MS Data MS Clock Gigabit LAN Connector Type: RJ45 connector. (Stacked LAN + USB Connector) Pin Number Function TDP0 TDN0 RDP0 TDP1 TDN1 RDN0 RDP1 RDP1 POS Motherboard with J1-CPU...
DCD - Data Carrier Detect RXD - Serial Data In TXD - Serial Data Out DTR - Data Terminal Ready DSR - Data Set Ready RTS - Request To Send CTS - Clear to Send RI - Ring Indicator POS Motherboard with J1-CPU...
Type: DSUB-9 pin, female (Tyco P/N: 5747844-4) Pin Number Function +12V RXD - Serial Data In TXD - Serial Data Out DTR - Data Terminal Ready DSR - Data Set Ready RTS - Request To Send CTS - Clear to Send POS Motherboard with J1-CPU...
DDC CLK DDC DATA VSYNC TMDS Data 1- TMDS Data 1+ TMDS Data shield 12,13 Not used HPD hot plug TMDS Data 0- TMDS Data 0+ 19-22 Not used TMDS CLK+ TMDS CLK- GREEN BLUE HSYNC POS Motherboard with J1-CPU...
Audio Connector Type: Stacked Audio Jack Port Number Function Line/Speaker out Middle Line In Bottom Microphone In Connectors and Headers for internal Connection SATA Type: 7 pin SATA connector, LD180F-S16P (Foxconn) or equivalent. Pin Number Function POS Motherboard with J1-CPU...
Power LED - nc. (coding) HDD LED + HDD LED - Speaker + Cash Drawer Interface Connector Type: 6 pin shrouded header Pin Number Function CD out 1 CD status 1 CD out 2 CD status 2 POS Motherboard with J1-CPU...
Type: 3 pin shrouded header, B3B-PH-K-S (JST) or equivalent. This connector is not assembled by default. Pin Number Function Intrusion input n.c. ATX Power Pin Number Function 1,2,11 +3.3V 3,5,7,13,15,16,17 4,6,19,20 Power ok 5V SB +12V -12V POS Motherboard with J1-CPU...
Pin 3 and 4 must be shorted externally by a wire if a speaker is connected to activate “mono” functionality. Pin Number Function Dongle Detect Speaker Bridge pin 1 Bridge pin 2 Mini PCIe Type: standard mini PCIe connector half and full size Function Function WAKE VCC3 POS Motherboard with J1-CPU...
NVRAM supported via optional NVRAM module for mini PCIe slot Main Memory 2x SO-DIMM, 1GB up to 4GB DDR3 SDRAM technology, based on 1Gb / 2Gb technology, unbuffered non-ECC running at 800 or 1066MHz POS Motherboard with J1-CPU...
Page 40
RMT, +12V of powered COM, +3.3V LVDS panel supply, Display Port I/O Shield Connectors Stacked USB and PS/2 Keyboard + Mouse, DVI-I, stacked USB and GigaBit LAN, standard COM1, audio (MIC In, LINE in, speaker Out / Line-Out), Display Port, RMT POS Motherboard with J1-CPU...
Page 41
2x USB (2 ports each), 5x powered COM 2x7 pin headers, 2x 4 pin Fan connector supporting PWM fan speed control, Front Panel interface, Cash Drawer interface, intrusion detect, mini PCIe Board Dimension 170.0mm x 170.0 mm POS Motherboard with J1-CPU...
Warning The lithium battery must be replaced only by identical batteries or types recommended by Wincor Nixdorf International. You can return the used batteries to your Wincor Nixdorf International sales outlet. Batteries containing harmful substances are marked accordingly. The chemical denotations are as follows: CD = Cadmium; Pb = Lead, Li = Lithium.
The Setup program has been designed to make it as easy as possible. It is a menu-driven program, which means you can scroll through the various sub-menus and make your selections among the predetermined choices. POS Motherboard with J1-CPU...
The right frame displays the key legend. The keys in the legend frame allow you to navigate through the various setup menus. The following table lists the keys found in the legend with their corresponding alternates and functions. POS Motherboard with J1-CPU...
To exit the help window, press the <Enter> or <Esc> key. Sub-Menu Note that a right pointer symbol “” appears left of certain fields. This pointer indicates that a sub-menu can be launched from this field. A sub-menu contains additional options for a field parameter. POS Motherboard with J1-CPU...
------------------------------------ ----------------------------------------- Power Supply: ------------------------------------ --- ------------------------------------ ------------------------------------ ----------------------------------------- This screen is for information only. There is nothing that could be changed within Setup. All information is intended to facilitate the support of your sys- tem. POS Motherboard with J1-CPU...
Open Software Foundation. The intent of UUIDs is to enable distributed systems to uniquely identify information without significant central coordination. System, Main board, Power Supply: The default placeholders may be replaced by specific data from factory, describing configuration, serial number etc. for each device. POS Motherboard with J1-CPU...
On the upper right frame find the keys listed to modify the values. Advanced Menu Trusted Computing Hardware Configuration CPU Configuration SATA Configuration USB Configuration I/O Port Configuration H/W Monitor POS Motherboard with J1-CPU...
[TPM Clear]: WARNING! Clearing erases information stored on the TPM. You will lose all created keys and access to data encrypted by these keys. After clearing the TPM, it will get the status deactivated and not owned. POS Motherboard with J1-CPU...
Handle the boot option ROM for legacy mass storage devices. Configuration Options: [Disabled] [Enabled] LAN Controller [Enabled] This point switches physical ON or OFF the Onboard LAN Controller. The PXE Boot ROM will be loaded, when the option Launch PXE OpROM is enabled. POS Motherboard with J1-CPU...
Page 52
OS before you can use Wake-on modes. Switching off the system by main power switch or front button-override will not initialize system wakeup functions. See following table, which wakeup events are available from dif- ferent power states: POS Motherboard with J1-CPU...
Page 53
Nixdorf COM card is mounted. The option [Always enabled] keep always the COM Ports 5/6 available and all COM Ports on the WN Card are also available. The option [Auto disabled] disable COM Ports5/6 if a WN COM card is mounted. POS Motherboard with J1-CPU...
Configuration options: Choose shareable memory size [128MB] [256MB]. Windows XP Graphics Support [Disabled] This option is only for graphic support for Windows XP and must be enabled for Windows XP installation. All other OS have to disable this option. Configuration options: [Enabled] [Disabled]. POS Motherboard with J1-CPU...
Execute Disable Bit [Enabled] Enable or disables Intel Execute Disable Bit function. This function may enhance protection for the computer, reducing exposure to viruses and malicious buffer overflow attacks when working with supporting software. Configuration options: [Disabled] [Enabled] POS Motherboard with J1-CPU...
SATA Port 1 SATA Controller(s) [Enabled] This option handle the onboard SATA Controller. The options are [Enabled] or [Disabled] Configure SATA as [IDE] Select a configuration mode for SATA Controller. The options are [AHCI] or [IDE] POS Motherboard with J1-CPU...
Legacy USB device was found. Configuration Options: [Disabled] [Enabled] [Auto] EHCI Hand-Off [Enabled] This entry is useful for the EHCI handling in some Windows operating sys- tems like Windows XP. Mostly this option must be enabled. Configuration Options: [Enabled] [Disabled] POS Motherboard with J1-CPU...
Serial Port 5 [ IO=2A0h; IRQ=11 ] Serial Port 6 [ IO=2E0h; IRQ=11 ] This setup screen shows the programmed values of the 6 onboard legacy serial ports. This is an on-screen information only (no options available). POS Motherboard with J1-CPU...
The onboard hardware monitor is able to detect the voltage output by the onboard voltage regulators. VBAT This Value shows the current state of CMOS Battery. A discharged battery will reported during the POST. Please change the battery according the chapter “Changing the Battery” at page 34. POS Motherboard with J1-CPU...
[IBA GE Slot 0200 v1381] ‘#n’ Boot Device These menu entries are used to specify the boot sequence from the availa- ble devices. Every entry (from #1 till #n) specifies a boot device that found during POST. POS Motherboard with J1-CPU...
UEFI BIOS setup which resets the open case detection au- tomatically. Additionally is a viewing point of the case open switch below the enable/disable entry point placed. This message will signalize the actual case open status directly. Configuration Options: [Disabled] [Enabled] POS Motherboard with J1-CPU...
Once you have finished making selections, choose this option from the Exit menu to ensure the values you selected are saved to the NVRAM. The NVRAM is sustained by an onboard backup battery and stays on even when POS Motherboard with J1-CPU...
With this option you can choose a boot device that are listed below this menu entry. Every entry the specifies a boot device that found during POST. Launch EFI Shell from filesystem device Attempts to launch EFI shell application from one of the available filsystem devices. POS Motherboard with J1-CPU...
South Bridge initialization after microcode loading 0x0A OEM initialization after microcode loading 0x0B Cache initialization SEC Error Codes 0x0C – 0x0D Reserved for future AMI SEC error codes 0x0E Microcode not found 0x0F Microcode not loaded POS Motherboard with J1-CPU...
Page 66
OEM post memory initialization codes 0x4E 0x4F DXE IPL is started 0x38 Post-Memory North Bridge initialization (North Bridge module specific) 0x39 Post-Memory North Bridge initialization (North Bridge module specific) 0x3A Post-Memory North Bridge initialization (North Bridge module specific) POS Motherboard with J1-CPU...
Page 67
0xF5- Reserved for future AMI progress codes 0xF7 Recovery Error Codes 0xF8 Recovery PPI is not available 0xF9 Recovery capsule is not found 0xFA Invalid recovery capsule 0xFB – Reserved for future AMI error codes 0xFF POS Motherboard with J1-CPU...
South Bridge DXE Initialization (South Bridge module specific) 0x78 ACPI module initialization 0x79 CSM initialization 0x7A – 0x7F Reserved for future AMI DXE codes 0x80 – 0x8F OEM DXE initialization codes 0x90 Boot Device Selection (BDS) phase is started POS Motherboard with J1-CPU...
Page 69
OEM BDS initialization codes 0xCF DXE Error Codes 0xD0 CPU initialization error 0xD1 North Bridge initialization error 0xD2 South Bridge initialization error 0xD3 Some of the Architectural Protocols are not available 0xD4 PCI resource allocation error. Out of Resources POS Motherboard with J1-CPU...
Some of the Architectural Protocols are not available No Console Output Devices are found No Console Input Devices are found Flash update is failed Reset protocol is not available Platform PCI resource requirements cannot be met POS Motherboard with J1-CPU...
Peripheral Component Interconnect Plug and Play POST Power On Self-Test Random Accessible Memory Read Only Memory Retail Systems SATA Serial AT Attachment (new version of hard disk interface) System Management Interrupt System Management Mode Trusted Platform Module POS Motherboard with J1-CPU...
Page 72
UEFI Unified Extensible Firmware Interface Universal Serial Bus UUID Universal Unique Identifier VBAT Battery Voltage Video Graphics Array Wake On LAN POS Motherboard with J1-CPU...
Page 73
Wincor Nixdorf International GmbH D-33094 Paderborn Order No.: 01750228406A...